ALM-3276800061 ACL resource is full
Description
ACLE/4/ACL_RULERESFULL_TRAP:OID [OID] The rule resource usage has reached [INTEGER]%.(Slot=[OCTET], Stage=[OCTET])
The ACL resource usage reaches 100%.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
3276800061 |
Warning |
Quality of service alarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
INTEGER |
The value is fixed as 100%. |
Slot |
Specifies the stack ID of the card where the alarm is generated. |
Stage |
Indicates the ACL processing stage when the alarm is generated. |
Impact on the System
None
Possible Causes
The ACL resource usage reaches 100%.
Procedure
- Run the display acl resource slot [ slot-id ] command in the system view to check whether the ACL resource usage on the switch is the same as the value in alarm.
- If so, go to step 2.
- If not, go to step 3.
- The following are suggestions:
- Check whether global or simplified traffic policy can be disabled on the device. If so, change the global or simplified traffic policy into interface-based traffic policy.
- Replace the boards with the boards that provide more ACL resources.
After the operation, check whether the alarm is cleared.
- If so, go to step 4.
- If not, go to step 3.
- Collect alarm, log, and configuration information, and contact technical support personnel.
- End.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot