Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ WAC&AP Alarms/ ALM-3416071 AP Power Supply Insufficient
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-3416071 AP Power Supply Insufficient

Description

ENTITYTRAP/2/PWR_INSUFF:OID [OID] AP power supply is insufficient.(PowerWorkMode=[OCTET], ExpectPowerWorkMode=[OCTET])

The AP power supply was insufficient.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3416071

Major

equipmentAlarm

Parameters

Name

Meaning

OID

Indicates the MIB object of the alarm.

PowerWorkMode

Indicates the actual power supply mode of an AP.

ExpectPowerWorkMode

Indicates the expected power supply mode of an AP.

Impact on the System

The AP restarts due to insufficient power supply.

Possible Causes

The power supply is insufficient for the AP.

Procedure

  1. Run the lldp enable command in the interface view to enable the LLDP function. In this way, the peer power supply device can identify the power supply standard of the local device and supply power as required.

    • If the alarm persists, go to step 2.
    • If the alarm is cleared, go to step 4.

  2. Check the peer power supply device and ensure that the power supply standard meets the AP's power supply requirements.

    • If the alarm persists, go to step 3.
    • If the alarm is cleared, go to step 4.

  3. Collect alarm and configuration information, and contact technical support personnel.
  4. End.

Related Information

None

Parent topic: WAC&AP Alarms