Updated on 2024-01-25 GMT+08:00

ALM-3416070 Built-in Bluetooth Module Fault

Description

WLAN/4/INNER_BLE_BROKEN: OID [OID] The AP's internal BLE module fails. (APMAC=[OPAQUE], APName=[STRING], APID=[INTEGER])

An AP's built-in Bluetooth module is faulty.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3416070

Warning

equipmentAlarm

Parameters

Name

Meaning

OID

Indicates the MIB object of the alarm.

APMAC

Indicates the MAC address of an AP.

APName

Indicates the name of an AP.

APID

Indicates the ID of an AP.

Impact on the System

The AP's built-in Bluetooth module cannot work normally.

Possible Causes

The system did not detect heartbeat messages from the AP's built-in Bluetooth module for 32 seconds.

Procedure

  1. Check the operating status of the AP's built-in Bluetooth module.

    • If the AP's built-in Bluetooth module works abnormally, go to step 2.
    • If the AP's built-in Bluetooth module works normally, go to step 3.

  2. Ensure that the AP's built-in Bluetooth module can work properly.

    • If the alarm persists, go to step 3.
    • If the alarm is cleared, go to step 4.

  3. Collect information about alarms, logs, and configurations, and then contact technical support personnel.
  4. This alarm is informational only, and no action is required.

Related Information

None