Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ WAC&AP Alarms/ ALM-303046814 AP PHY CMOS Fault
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-303046814 AP PHY CMOS Fault

Description

WLAN/4/AP_FMEA_FAULT_PHY_CMOS:OID [OID] AP PHY CMOS fault. (APMAC=[OPAQUE], APName=[STRING], APID=[INTEGER])

The AP's PHY chip fails.

Attribute

Alarm ID

Alarm Severity

Alarm Type

303046814

Warning

equipmentAlarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

APMAC

Indicates the MAC address of an AP.

APName

Indicates the AP name.

APID

Indicates the AP ID.

Impact on the System

The AP cannot properly work.

Possible Causes

The AP's PHY chip fails.

Procedure

  1. Check whether services are affected.

    • If so, go to Step 2.
    • If not, go to Step 4.

  2. Restart the AP. Then, check whether the alarm persists.

    • If so, go to Step 3.
    • If not, go to Step 5.

  3. Replace the faulty AP. Then, check whether the alarm persists.

    • If so, go to Step 4.
    • If not, go to Step 5.

  4. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  5. End.

Related Information

None

Parent topic: WAC&AP Alarms