ALM-303046809 AP CRC Is Abnormal Notify
Description
WLAN/4/AP_CRC_TOO_HIGH:OID [OID] AP CRC is abnormal notify. (APMAC=[OPAQUE], APName=[STRING], APCrcErrRate=[LONG]/10000, PortType=[OCTET], PortID=[INTEGER], APID=[INTEGER])
The number of CRC error packets collected at a specified sampling interval exceeded the threshold.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046809 |
Warning |
environmentalAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the MAC address of an AP. |
APName |
Indicates the AP name. |
APCrcErrRate |
Indicates the number of CRC error packets. |
PortType |
Indicates the AP port type. |
PortID |
Indicates the AP port number. |
APID |
Indicates the AP ID. |
Impact on the System
None
Possible Causes
The number of CRC error packets collected at a specified sampling interval exceeded the threshold.
Procedure
- Run the display port-link-profile { all | name profile-name } command to check whether the configured alarm threshold for CRC errors is proper.
- If so, go to Step 3.
- If not, go to Step 2.
- Run the crc-alarm enable [ high-threshold high-threshold-value | low-threshold low-threshold-value ]* command to set a proper alarm threshold for CRC errors.
- If the alarm persists, go to Step 3.
- If the alarm is cleared, go to Step 4.
- Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
- End.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot