ALM-303046806 The AP Does Not Support the Country Code Configured on the WAC
Description
WLAN/4/AP_UNSUPPORT_COUNTRY_CODE:OID [OID] AP not support configured country code notify.(APMAC=[MacAddress], APName=[STRING], COUNTRY CODE=[OCTET], APID=[INTEGER])
The AP does not support the country code configured on the AC.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046806 |
Warning |
equipmentAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the MAC address of an AP. |
APName |
Indicates the AP name. |
COUNTRY CODE |
Indicates the country code configured on the AP. |
APID |
Indicates the AP ID. |
Impact on the System
The AP cannot get online.
Possible Causes
A country code not supported by the AP is configured on the AC.
Procedure
- Run the display regulatory-domain-profile { all | name profile-name } command to check whether the country code configured on the AC is the same as that supported by the AP.
- If the country codes are the same, go to Step 3.
- If the country codes are different, go to Step 2.
- Run the country-code country-code command to set the country code of the AC to the one supported by the AP.
- If the alarm persists, go to Step 4.
- If the alarm is cleared, go to Step 5.
- Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
- End.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot