ALM-303046804 AP Optical Module Temperature Is Too High Notify
Description
WLAN/4/AP_OPTICAL_TEMPERATURE_TOO_HIGH:OID [OID] AP optical module temperature is too high notify. (APMAC=[MacAddress], APName=[STRING], ApIfIndex=[INTEGER], Ap Optical Temperature=[INTEGER]°C, ApEntityPhysicalName=[OCTET], APID=[INTEGER])
The temperature of AP's optical module is higher than the upper temperature threshold.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046804 |
Warning |
equipmentAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the MAC address of an AP. |
APName |
Indicates the AP name. |
ApIfIndex |
Indicates the index of the AP interface on which the optical module is installed. Only the AD9430DN-24 and AD9431DN-24X support this object. |
Ap Optical Temperature |
Indicates the temperature of the AP's optical module. |
ApEntityPhysicalName |
Indicates the name of the AP interface on which the optical module is installed. Only the AD9430DN-24 and AD9431DN-24X support this object. |
APID |
Indicates the AP ID. |
Impact on the System
None
Possible Causes
The temperature of AP's optical module is higher than the upper temperature threshold.
Procedure
- Reduce service traffic on the AP.
- If the alarm persists, go to Step 4.
- If the alarm is cleared, go to Step 5.
- Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
- End.
Related Information
ALM-303046805 AP Optical Module Temperature Is Too Low Notify
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot