ALM-303046801 AC Has System Switched Notify
Description
WLAN/4/AC_SYSTEM_SWITCH: OID [OID] AC has system switched notify.(APMAC=[OPAQUE], APName=[STRING], APSN=[OCTET], SwitchType=[INTEGER], APID=[INTEGER])
The active/standby switchover occurred on the AC.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046801 |
Warning |
equipmentAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the MAC address of an AP. |
APName |
Indicates the AP name. |
APSN |
Indicates the sequence number of an AP. |
SwitchType |
Indicates the switchover type of the AC. |
APID |
Indicates the AP ID. |
Impact on the System
None
Possible Causes
The AC that is connected to the AP is faulty, or the network becomes unstable.
Procedure
- Check the running status of the AC, which manages APs before the switchover.
- If the AC is reset, go to Step 4.
- If the AC is not reset, go to Step 2.
- Check whether the network is attacked or congested.
- If so, go to Step 3.
- If not, go to Step 4.
- Analyze the cause for network instability and rectify the fault based on the actual network situation.
- Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
- End.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot