ALM-4287373386 The Temperature Is Not Within the Threshold

Description

ENTITYTRAP/1/ENTITYBRDTEMPALARM:OID [OID] Temperature rises over or falls below the warning alarm threshold. (Index=[INTEGER1],EntryPhysicalIndex=[INTEGER2], PhysicalName="[OCTET]", EntityThresholdType=[INTEGER3],EntityThresholdValue=[INTEGER4],EntityThresholdCurrent=[INTEGER5], EntityTrapFaultID=[INTEGER6])

This alarm is generated when the temperature is not within the threshold. You can run the display temperature command to view the alarm threshold.

Attribute

Alarm ID	OID	Alarm Severity	Alarm Type
4287373386	1.3.6.1.4.1.2011.5.25.219.2.10.13	Critical	environmentalAlarm

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
Index	Indicates the index of a temperature sensor.
EntryPhysicalIndex	Indicates the sub-index of an entity.
PhysicalName	Indicates the name of an entity.
EntityThresholdType 1: rise over 2: fall below	Indicates the alarm type.
EntityThresholdValue	Indicates the alarm threshold.
EntityThresholdCurrent	Indicates the current temperature.
EntityTrapFaultID	Indicates the cause ID of the alarm.

Impact on the System

The board overheats. If the temperature is higher than the fatal high temperature threshold, the board will be powered off, leading to service interruption.

Possible Causes

The fan is faulty, causing high temperature of the board.

Procedure

Run the display temperature all command to check the device temperature.
Run the display fan command to check the fan status and speed. Cool the device quickly. If a fan alarm is displayed at the same time, replace the fan.

Clearing

After the certificate is deleted, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the Current Alarms page.

Parent topic: V300 AR Alarms

Previous topic: ALM-4287373420 Battery low

Next topic: ALM-3491241985 The BGP Neighbor Is Changed