ALM-4287373328 A Board Is Removed
Description
ENTITYTRAP/4/BOARDREMOVE: OID [OID] Card has been removed. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType= [INTEGER], EntityTrapFaultID=[INTEGER])
A board was removed.
Attribute
Alarm ID |
OID |
Alarm Severity |
Alarm Type |
---|---|---|---|
4287373328 |
1.3.6.1.4.1.2011.5.25.219.2.2.1 |
Major |
Equipment alarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
Index |
Indicates the index. |
EntityPhysicalIndex |
Indicates the physical entity index. |
EntPhysicalName |
Indicates the physical entity name. |
EntityTrapEntType |
Indicates the type of the physical entity, such as mpu(1) and lpu(2). |
EntityTrapFaultID |
Indicates the error code. |
Impact on the System
All services on the board are interrupted.
Possible Causes
A board was removed.
Procedure
- Check whether the board was removed manually.
- If so, no action is required.
- If not, go to step 2.
- Insert the corresponding board. After the board is started, run the display device command to check whether the board in the corresponding slot is registered successfully.
- If not, go to step 3.
- If so, go to step 4.
- Collect alarm information and configuration information, and then contact technical support personnel.
- End.
Clearing
The alarm needs to be cleared manually.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot