Updated on 2024-01-25 GMT+08:00

ALM-15794956 hwBgpPeerAddrFamilyRouteThresholdExceed

Description

The number of routes received from peers in a BGP address family reached the alarm threshold. (Address Family=[AddressFamily], MaxRouteNumber=[RouteLimitNum], AlarmThreshold=[RouteLimitThreshold], BGP instance name=[InstanceName])

The number of routes received from peers in a BGP address family reached the alarm threshold.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

15794956

1.3.6.1.4.1.2011.5.25.177.1.3.29

Major

Communication alarm

Parameters

Name Meaning

AddressFamily

Address family

RouteLimitNum

The maximum route number

RouteLimitThreshold

Alarm threshold

InstanceName

BGP instance name. "-" indicates the default BGP instance, and other values indicate multiple instances.

Impact on the System

The number of routes received from peers in the address family has reached the alarm threshold.

Possible Causes

The number of routes received from peers in a BGP address family reached the alarm threshold.

Procedure

1. Reduce the number of routes sent by the peer end. Then, check whether the alarm is cleared. That is, check whether the matching clear alarm (hwBgpPeerAddrFamilyRouteThresholdExceedClear) is generated.
  • If the clear alarm is generated, go to Step 3.
  • If the clear alarm is not generated, go to Step 2.

2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.

Clearing

After the fault is rectified, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the Current Alarms page.