Help Center/ Meeting/ FAQs/ Hard Terminal Service Usage Problems/ How Do I Activate the TE30/TE40/TE50/TE60 Through Wi-Fi?

Updated on 2022-11-28 GMT+08:00

View PDF

How Do I Activate the TE30/TE40/TE50/TE60 Through Wi-Fi?

Use the remote control to connect the hard terminal to a Wi-Fi network and activate the hard terminal.

1. Set the connection type.

It is recommended that you set Connection type to Dynamic IP when the hard terminal is connected to a Wi-Fi network.

If the hard terminal is powered on for the first time, set the IPv4 connection type to Dynamic IP in Wizard > General.

If the hard terminal has not used before, choose Advanced > Settings > Network > IP and set the IP address to Dynamic IP.

2. Connect to the Wi-Fi network.

If you are on the setup wizard screen, press the Back key to exit the wizard.

Choose Advanced > Settings > Network > Wi-Fi, enable Wi-Fi, and select the Wi-Fi network to be connected. When the connection status indicator is on, the connection is successful.

3. Activate the hard terminal.

Choose Advanced > Settings > Installation > Wizard, and activate the hard terminal.

Parent topic: Hard Terminal Service Usage Problems

Feedback

Was this page helpful?

Helpful Not helpful

Provide feedback

Thank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.

The system is busy. Please try again later.

Which of the following issues have you encountered?

Content is inconsistent with the product UI

Unclear descriptions

Lack of examples or code

Incorrect steps

Can't find what I need

Lack of best practices

Feedback (optional)

0/500

Select at least one type of issue, and enter your comments or suggestions.

Enter a maximum of 500 characters.

Submit Cancel

For any further questions, feel free to contact us through the chatbot.

Chatbot