- What's New
- Function Overview
- Product Bulletin
- Service Overview
- Billing
- Getting Started
- User Guide
-
Best Practices
- Direct Connect Best Practices
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using Static Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using BGP Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over Two Connections in Load Balancing Mode (Virtual Gateway)
- Connecting an On-Premises Data Center to a VPC over Two Connections in an Active/Standby Pair (Virtual Gateway)
- Connecting an On-Premises Data Center to Multiple VPCs that Do Not Need to Communicate with Each Other
- Connecting an On-Premises Data Center to Multiple VPCs in the Same Region Using Direct Connect and VPC Peering
- Using a Public NAT Gateway and Direct Connect to Accelerate Internet Access
- Allowing On-Premises Servers to Access Cloud Services Using Direct Connect and VPC Endpoint
-
API Reference
- Before You Start
- API Overview
- Calling APIs
-
API
- Connections
- Virtual Gateways
-
Virtual Interfaces
- Creating a Virtual Interface
- Querying the Virtual Interface List
- Querying Details About a Virtual Interface
- Updating a Virtual Interface
- Deleting a Virtual Interface
- Creating a Virtual Interface Peer
- Updating a Virtual Interface Peer
- Deleting a Virtual Interface Peer
- Performing a Virtual Interface Switchover Test
- Querying the List of Virtual Interface Switchover Test Records
- Tag Management
- Quota Management
- Global DC Gateways
- Peer Links
- Connect Gateways
- Global EIPs
- Global DC Gateway Route Tables
- Public Parameters
- Appendix
- SDK Reference
- Troubleshooting
-
FAQs
-
Popular Questions
- What Are the Network Requirements for Connections?
- What Locations Are Available for Direct Connect?
- How Do I Select a Carrier When Purchasing a Connection?
- How Will I Be Billed for Direct Connect?
- How Do I Submit a Service Ticket?
- How Do I Test the Network Connectivity Between a Location and the Cloud?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
-
Product Consultation
- What Are the Network Requirements for Connections?
- What Are 1GE and 10GE?
- What Locations Are Available for Direct Connect?
- Is BGP Routing Supported in Direct Connect?
- What Is Full-Service Installation Statement?
- How Do I Submit a Service Ticket?
- What Are the Network Latency and Packet Loss Rate of a Connection?
- Are the Uplink and Downlink Bandwidths of a Direct Connect Connection the Same?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
- How Do I Plan the VPCs for a New Connection?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- How Do I Configure BFD for a Connection?
- Leased Line
-
Interconnection with the Cloud
- Can I Access the Same VPC over Multiple Connections?
- How Do I Plan the CIDR Blocks for a Connection?
- What Should I Consider When I Use Direct Connect to Access the Cloud?
- Does Direct Connect Support NAT?
- Can the VLAN of the On-premises Network Be Used in the VPC Through Direct Connect?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
-
Networking and Scenarios
- Can Multiple Connections Access the Same VPC?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
- Can I Limit the Bandwidth Available on Each Hosted Connection?
- How Do I Plan the VPCs for a New Connection?
-
Related Console Operations
- How Do I Submit a Service Ticket?
- How Can I Unsubscribe from Direct Connect?
- What Parameters Can Be Modified After I Have Created a Virtual Interface?
- Do I Need to Delete the Virtual Gateway and Virtual Interface Before Deleting a Hosted Connection?
- How Do I Change the Routing Mode of a Connection?
- How Do I Delete a Hosted Connection?
- What Is the BGP ASN Used by Huawei Cloud?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- Troubleshooting
- Billing
- Resource Monitoring
- Quota
-
Popular Questions
-
More Documents
- User Guide (ME-Abu Dhabi Region)
- User Guide (Paris Region)
- eu-west-0-api
- User Guide (Kuala Lumpur Region)
-
API Reference (Kuala Lumpur Region)
- Before You Start
- API Overview
- Calling APIs
- API Usage
-
API
- Connection
- Virtual Gateway
-
Virtual Interface
- Querying Details About a Virtual Interface
- Updating a Virtual Interface
- Deleting a Virtual Interface
- Querying the Virtual Interface List
- Creating a Virtual Interface
- Updating a Virtual Interface Peer
- Deleting a Virtual Interface Peer
- Creating a Virtual Interface Peer
- Performing a Virtual Interface Switchover Test
- Querying the Switchover Test Records of a Virtual Interface
- Tag management
- Quota Management
- Public Parameters
- Appendixes
- Change History
- General Reference
Copied.
Updating a LAG
Function
This API is used to update a LAG, including the name and description.
Calling Method
For details, see Calling APIs.
URI
PUT /v3/{project_id}/dcaas/link-aggregation-groups/{dc_lag_id}
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
project_id |
Yes |
String |
Specifies the project ID. |
dc_lag_id |
Yes |
String |
Specifies the LAG ID. |
Request Parameters
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
X-Auth-Token |
Yes |
String |
Specifies the user token. To obtain the token, see section "Obtaining the User Token" in the Identity and Access Management API Reference. The token is the value of X-Subject-Token in the response header. Minimum: 0 Maximum: 10240 |
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
link_aggregation_group |
No |
UpdateLinkAggregationGroup object |
Specifies the LAG. |
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
name |
No |
String |
Specifies the LAG name. Minimum: 0 Maximum: 64 |
description |
No |
String |
Provides supplementary information about the LAG. Minimum: 0 Maximum: 128 |
min_up_num |
No |
Integer |
Specifies the lower threshold of active links in a LAG. When the number of active links is smaller than the lower threshold, the LAG status changes to Down. Minimum: 1 Maximum: 16 |
associate_dc |
No |
Array of strings |
Lists the IDs of connections to be added to the LAG. |
disassociate_dc |
No |
Array of strings |
Lists the IDs of connections to be deleted from the LAG. |
Response Parameters
Status code: 200
Parameter |
Type |
Description |
---|---|---|
request_id |
String |
Specifies the request ID. |
link_aggregation_group |
LinkAggregationGroup object |
LAG |
Parameter |
Type |
Description |
---|---|---|
id |
String |
Specifies the LAG ID. |
tenant_id |
String |
Specifies the project ID. |
name |
String |
Specifies the LAG name. Minimum: 0 Maximum: 64 |
description |
String |
Provides supplementary information about the LAG. Minimum: 0 Maximum: 128 |
work_mode |
String |
Specifies the negotiation mode of the LAG: static or LACP. Enumeration values:
|
min_up_num |
Integer |
Specifies the lower threshold of active links in a LAG. When the number of active links is smaller than the lower threshold, the LAG status changes to Down. Minimum: 1 Maximum: 16 |
device_id |
String |
Specifies the ID of the device on which the LAG is used. |
status |
String |
Specifies the LAG status. |
admin_state_up |
Boolean |
Specifies the administrative status of the LAG. |
enterprise_project_id |
String |
Specifies the ID of the enterprise project that the LAG belongs to. |
apply_time |
String |
Specifies the time when the LAG was requested. The UTC time format yyyy-MM-ddTHH:mm:ss.SSSZ is used. |
create_time |
String |
Specifies the time when the LAG was created. The UTC time format yyyy-MM-ddTHH:mm:ss.SSSZ is used. |
delete_time |
String |
Specifies the time when the LAG was deleted. |
public_border_group |
String |
Specifies the public border group corresponding to the AZ where the LAG is used. |
Example Requests
Updating the name and description of a LAG
PUT https://{dc_endpoint}/v3/6fbe9263116a4b68818cf1edce16bc4f/dcaas/link-aggregation-groups/a7c5ce8a-62a8-433e-94af-d1894effce59 { "link_aggregation_group" : { "name" : "Lag01-02", "description" : "to idc1" } }
Example Responses
Status code: 200
OK
{ "request_id" : "9a4f4dfc4fb2fc101e65bba07d908535", "link_aggregation_group" : { "id" : "a7c5ce8a-62a8-433e-94af-d1894effce59", "name" : "Lag02-02", "description" : "to bj1", "tenant_id" : "ed28c294165741faaeccab26913122a1", "min_up_num" : 1, "enterprise_project_id" : 0, "work_mode" : "Static", "device_id" : "26.151.63.100", "status" : "DOWN", "admin_state_up" : null, "public_border_group" : null, "apply_time" : "2023-06-14T07:29:25.000Z", "create_time" : "2023-06-14T07:29:25.000Z" } }
Status Codes
Status Code |
Description |
---|---|
200 |
OK |
Error Codes
See Error Codes.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot