Help Center> Edge Data Center Management> User Guide> O&M Management> Security> Access Control Management> Managing Access Control Devices
Updated on 2022-02-21 GMT+08:00
View PDF

Managing Access Control Devices

You can create access control devices and remotely open and close the door of an access control device to effectively manage the access control device.

Prerequisites

You have the operation rights for Access Control Management.

Procedure

  1. Choose Maintenance Management > Security Protection > Access Control Management.
  2. In the navigation tree on the left, choose Device Management and perform the following operations based on the scenario.

    Table 1 Managing access control devices

    Operation

    Description

    Procedure

    Creating an access control device

    Before managing access control devices, you need to connect the access control devices to the NetEco.

    1. Click Create.

    2. On the Planning Configuration page, create an access control device. For details, see Adding a Device Through Automatic Discovery.

      After an access control device is created successfully, you can view the device on the Device Management page.

    Remotely opening a door

    You can remotely open a door under an access controller.
    Click in the Operation column.
    NOTE:

    The door is automatically closed within 6 seconds after the door is remotely opened.

    Remotely closing a door

    You can remotely close a door under an access controller.
    • Remotely closing a single door

      Click in the Operation column.

    • Remotely closing doors in batches

      Click Remotely close door(s) in batches.