Updated on 2024-01-23 GMT+08:00

Creating a Load Balancer

Function

This API is used to create a private network load balancer. After the load balancer is created, its details, such as load balancer ID, IP address, and subnet ID, are returned.

To create a public network load balancer, you also need to call the API for assigning an EIP and associate this IP address to the port bound to the IP address of the private network load balancer.

URI

POST /v2.0/lbaas/loadbalancers

Request

Table 1 Parameter description

Parameter

Mandatory

Type

Description

loadbalancer

Yes

Object

Specifies the load balancer. For details, see Table 2.

Table 2 loadbalancer parameter description

Parameter

Mandatory

Type

Description

name

No

String

Specifies the load balancer name.

The value contains a maximum of 255 characters.

description

No

String

Provides supplementary information about the load balancer.

The value contains a maximum of 255 characters.

tenant_id

No

String

Specifies the ID of the project where the load balancer is used.

The value contains a maximum of 255 characters.

The value must be the same as the value of project_id in the token.

project_id

No

String

Specifies the ID of the project to which the load balancer belongs. This parameter has the same meaning as tenant_id.

The value must be the same as the value of project_id in the token.

vip_subnet_id

Yes

String

Specifies the ID of the IPv4 subnet where the load balancer works. You can obtain the value by calling the API for querying subnets ({VPC endpoint}/v2.0/subnets) using the GET method.

The private IP address of the load balancer is in this subnet.

Only IPv4 subnets are supported.

provider

No

String

Specifies the provider of the load balancer.

The value can only be vlb.

vip_address

No

String

Specifies the private IP address of the load balancer.

This IP address must be the one in the subnet specified by vip_subnet_id. If this parameter is not specified, an IP address is automatically assigned to the load balancer from the subnet specified by vip_subnet_id.

The value contains a maximum of 64 characters.

admin_state_up

No

Boolean

Specifies the administrative status of the load balancer.

This parameter is reserved, and the default value is true.

Response

Table 3 Response parameters

Parameter

Type

Description

loadbalancer

Object

Specifies the load balancer. For details, see Table 4.

Table 4 loadbalancer parameter description

Parameter

Type

Description

id

String

Specifies the load balancer ID.

project_id

String

Specifies the ID of the project to which the load balancer belongs. This parameter has the same meaning as tenant_id.

tenant_id

String

Specifies the ID of the project where the load balancer is used.

The value contains a maximum of 255 characters.

name

String

Specifies the load balancer name.

The value contains a maximum of 255 characters.

description

String

Provides supplementary information about the load balancer.

The value contains a maximum of 255 characters.

vip_subnet_id

String

Specifies the ID of the IPv4 subnet where the load balancer works.

vip_port_id

String

Specifies the ID of the port bound to the private IP address of the load balancer.

When you create a load balancer, the system automatically creates a port and associates it with a security group. However, the security group will not take effect.

provider

String

Specifies the provider of the load balancer.

vip_address

String

Specifies the private IP address of the load balancer.

The value contains a maximum of 64 characters.

listeners

Array

Lists the IDs of listeners added to the load balancer. For details, see Table 5.

pools

Array

Lists the IDs of backend server groups associated with the load balancer. For details, see Table 6.

operating_status

String

This parameter is reserved, and its value can be ONLINE or FROZEN.

It specifies the operating status of the load balancer.

provisioning_status

String

This parameter is reserved, and its value can only be ACTIVE.

It specifies the provisioning status of the load balancer.

admin_state_up

Boolean

Specifies the administrative status of the load balancer.

This parameter is reserved. The value can be true or false.

  • true: Enabled
  • false: Disabled

tags

Array

Lists load balancer tags.

created_at

String

Specifies the time when the load balancer was created.

The UTC time is in YYYY-MM-DDTHH:MM:SS format.

The value contains a maximum of 19 characters.

updated_at

String

Specifies the time when the load balancer was updated.

The UTC time is in YYYY-MM-DDTHH:MM:SS format.

The value contains a maximum of 19 characters.

Table 5 listeners parameter description

Parameter

Type

Description

id

String

Specifies the ID of the associated listener.

Table 6 pools parameter description

Parameter

Type

Description

id

String

Specifies the ID of the associated backend server group.

Example Request

  • Example request 1: Creating a private network load balancer
    POST https://{Endpoint}/v2.0/lbaas/loadbalancers 
    
    { 
        "loadbalancer": { 
            "name": "loadbalancer1", 
            "description": "simple lb", 
            "tenant_id": "1867112d054b427e808cc6096d8193a1", 
            "vip_subnet_id": "58077bdb-d470-424b-8c45-2e3c65060a5b", 
            "vip_address": "192.168.0.100", 
            "admin_state_up": true 
        } 
    }
  • Example request 2

    (Bind an EIP to the port that has been bound to the load balancer's private IP address. For details about the parameters, see Table 7.)

    Table 7 Request parameters

    Parameter

    Mandatory

    Type

    Description

    publicip

    Yes

    Object

    Specifies the EIP. For details, see Table 8.

    bandwidth

    Yes

    Object

    Specifies the bandwidth. For details, see Table 9.

    enterprise_project_id

    No

    String

    • Specifies the enterprise project ID. The value is 0 or a UUID that can contain a maximum of 36 characters, including hyphens (-).
    • When assigning an EIP, you need to bind an enterprise project ID to the EIP.
    • If this parameter is not specified, the default value is 0.
    NOTE:

    For more information about enterprise projects and how to obtain enterprise project IDs, see Enterprise Management User Guide.

    Table 8 publicip parameter description

    Parameter

    Mandatory

    Type

    Description

    type

    Yes

    String

    • Specifies the EIP type.
    • The value can be 5_telcom, 5_union, 5_bgp, or 5_sbgp.
      • CN South-Guangzhou: 5_bgp and 5_sbgp
      • CN East-Shanghai2: 5_bgp and 5_sbgp
      • CN North-Beijing1: 5_bgp and 5_sbgp
      • CN-Hong Kong: 5_bgp
      • CN Southwest-Guiyang1: 5_bgp and 5_sbgp
      • CN North-Beijing4: 5_bgp and 5_sbgp
    • Note:
      • The configured value must be supported by the system.
      • publicip_id is an IPv4 port. If publicip_type is not specified, the default value is 5_bgp.

    ip_version

    No

    Integer

    • Specifies the EIP version.
    • The value can be 4 and 6. 4 indicates an IPv4 address, and 6 indicates an IPv6 address.
    • Note:
      • The configured value must be supported by the system.
      • If this parameter is left blank or is an empty string, an IPv4 address is assigned by default.

    ip_address

    No

    String

    • Specifies the EIP to be assigned. The system automatically assigns an EIP if you do not specify it.
    • The value must be a valid IPv4 address in the available IP address range.
    Table 9 bandwidth parameter description

    Parameter

    Mandatory

    Type

    Description

    name

    No

    String

    • Specifies the bandwidth name.
    • The value can contain 1 to 64 characters that can contain letters, digits, underscores (_), hyphens (-), and periods (.).
    • This parameter is mandatory when share_type is set to PER. This parameter will be ignored when share_type is set to WHOLE with an ID specified.

    size

    No

    Integer

    • Specifies the bandwidth (Mbit/s).
    • The value ranges from 1 to 300 by default. (The range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.)
    • This parameter is mandatory when share_type is set to PER. This parameter will be ignored when share_type is set to WHOLE with an ID specified.
    • The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows:
      • The minimum increment is 1 Mbit/s if the allowed bandwidth ranges from 0 to 300 Mbit/s.
      • The minimum increment is 50 Mbit/s if the allowed bandwidth ranges from 301 Mbit/s to 1000 Mbit/s.
      • The minimum increment is 500 Mbit/s if the allowed bandwidth is greater than 1,000 Mbit/s.

    id

    No

    String

    • Specifies the bandwidth ID. You can specify an existing shared bandwidth when assigning an EIP.
    • The value can be the ID of the shared bandwidth whose type is set to WHOLE.

    share_type

    Yes

    String

    • Specifies the bandwidth type.
    • Value options:
      • PER: indicates dedicated bandwidth.
      • WHOLE: indicated shared bandwidth.

    charge_mode

    No

    String

    • The default value is traffic. Currently, only billing by traffic is supported.
    • Step 1: Apply for an EIP.
      POST https://{VPCEndpoint}/v1/8b7e35ad379141fc9df3e178bd64f55c/publicips
      
      {
          "publicip": {
              "type": "5_bgp",
              "ip_version": 4
          },
          "bandwidth": {
              "name": "bandwidth123",
              "size": 10,
              "share_type": "PER"
          }
      }
    • Example response
      {
          "publicip": {
              "id": "f588ccfa-8750-4d7c-bf5d-2ede24414706",
              "status": "PENDING_CREATE",
              "type": "5_bgp",
              "public_ip_address": "139.9.204.183",
              "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
              "ip_version": 4,
              "create_time": "2019-06-29 06:45:32",
              "bandwidth_size": 1
              
          }
      }
    • Step 2: Bind the EIP. (The value of public_id is the same as that in the ▪ Example response, and the value of port_id is the same as that of vip_port_id in Example response 1.)
      PUT /v1/8b7e35ad379141fc9df3e178bd64f55c/publicips/f588ccfa-8750-4d7c-bf5d-2ede24414706
      
      {
          "publicip": {
              "port_id": "a7ecbdb5-5a63-41dd-a830-e16c0a7e04a7"
          }
      }
    • Example response
      {
        "publicip": {
          "id": "f588ccfa-8750-4d7c-bf5d-2ede24414706",
          "status": "ACTIVE",
          "type": "5_bgp",
          "port_id": "a7ecbdb5-5a63-41dd-a830-e16c0a7e04a7",
          "public_ip_address": "139.9.204.183",
          "private_ip_address": "192.168.1.131",
          "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
          "create_time": "2019-06-29 07:33:18",
          "bandwidth_size": 1,
          "ip_version": 4
        }
      }
    • After the preceding steps are complete, the load balancer has the capability of accessing the public network. You can access the load balancer using 139.9.204.183, the value of parameter public_ip_address.

Example Response

  • Example response 1
    {
        "loadbalancer": {
            "description": "simple lb",
            "provisioning_status": "ACTIVE",
            "tenant_id": "1867112d054b427e808cc6096d8193a1",
            "project_id": "1867112d054b427e808cc6096d8193a1",
            "created_at": "2019-01-19T05:32:56",
            "admin_state_up": true,
            "updated_at": "2019-01-19T05:32:57",
            "id": "ea2843da-4026-49ec-8338-8fa015b067fc",
            "pools": [],
            "listeners": [],
            "vip_port_id": "a7ecbdb5-5a63-41dd-a830-e16c0a7e04a7",
            "operating_status": "ONLINE",
            "vip_address": "192.168.0.100",
            "vip_subnet_id": "58077bdb-d470-424b-8c45-2e3c65060a5b",
            "provider": "vlb",
            "tags": [],
            "name": "loadbalancer1"
        }
    }
  • Example response 2
    POST https://{Endpoint}/v2.0/lbaas/loadbalancers 
    
    { 
        "loadbalancer": { 
            "name": "loadbalancer1", 
            "description": "simple lb", 
            "tenant_id": "1867112d054b427e808cc6096d8193a1", 
            "vip_subnet_id": "58077bdb-d470-424b-8c45-2e3c65060a5b", 
            "vip_address": "192.168.0.100", 
            "admin_state_up": true 
        } 
    }

After the preceding steps are complete, the load balancer has the capability of accessing the public network. You can access the load balancer using 139.9.204.183, the value of parameter public_ip_address.

Status Code

For details, see Status Codes.