Querying Health Checks

Function

This API is used to query all health checks.

Constraints

This API has the following constraints:

Parameters marker, limit, and page_reverse are used for pagination query.
Parameters marker and page_reverse take effect only when they are used together with parameter limit.

Calling Method

For details, see Calling APIs.

URI

GET /v3/{project_id}/elb/healthmonitors

**Table 1** Path Parameters
Parameter	Mandatory	Type	Description
project_id	Yes	String	Specifies the project ID.

**Table 2** Query Parameters
Parameter	Mandatory	Type	Description
marker	No	String	Specifies the ID of the last record on the previous page. Note: This parameter must be used together with limit. If this parameter is not specified, the first page will be queried. This parameter cannot be left blank or set to an invalid ID.
limit	No	Integer	Specifies the number of records on each page. Minimum: 0 Maximum: 2000 Default: 2000
page_reverse	No	Boolean	Specifies whether to use reverse query. Values: true: Query the previous page. false (default): Query the next page. Note: This parameter must be used together with limit. If page_reverse is set to true and you want to query the previous page, set the value of marker to the value of previous_marker.
id	No	Array	Specifies the health check ID. Multiple IDs can be queried in the format of id=xxx&id=xxx.
monitor_port	No	Array	Specifies the port used for the health check. Multiple ports can be queried in the format of monitor_port=xxx&monitor_port=xxx.
domain_name	No	Array	Specifies the domain name to which HTTP requests are sent during the health check. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. Multiple domain names can be queried in the format of domain_name=xxx&domain_name=xxx.
name	No	Array	Specifies the health check name. Multiple names can be queried in the format of name=xxx&name=xxx.
delay	No	Array	Specifies the interval between health checks, in seconds. The value ranges from 1 to 50. Multiple intervals can be queried in the format of delay=xxx&delay=xxx.
max_retries	No	Array	Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. Multiple values can be queried in the format of max_retries=xxx&max_retries=xxx.
admin_state_up	No	Boolean	Specifies the administrative status of the health check. The value can be true (health check is enabled) or false (health check is disabled).
max_retries_down	No	Array	Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. The value ranges from 1 to 10. Multiple values can be queried in the format of max_retries_down=xxx&max_retries_down=xxx.
timeout	No	Integer	Specifies the maximum time required for waiting for a response from the health check, in seconds.
type	No	Array	Specifies the health check protocol. The value can be TCP, UDP_CONNECT, HTTP, or HTTPS. Multiple protocols can be queried in the format of type=xxx&type=xxx.
expected_codes	No	Array	Specifies the expected HTTP status code. This parameter will take effect only when type is set to HTTP or HTTPS. The value options are as follows: A specific value, for example, 200 A list of values that are separated with commas (,), for example, 200, 202 A value range, for example, 200-204 The default value is 200. Multiple status codes can be queried in the format of expected_codes=xxx&expected_codes=xxx.
url_path	No	Array	Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. This parameter is available only when type is set to HTTP. Multiple paths can be queried in the format of url_path=xxx&url_path=xxx.
http_method	No	Array	Specifies the HTTP method. The value can be GET, HEAD, POST, PUT, DELETE, TRACE, OPTIONS, CONNECT, or PATCH. Multiple methods can be queried in the format of http_method=xxx&http_method=xxx. This parameter is unsupported. Please do not use it.
enterprise_project_id	No	Array	Specifies the enterprise project ID. If this parameter is not passed, resources in the default enterprise project are queried, and authentication is performed based on the default enterprise project. If this parameter is passed, its value can be the ID of an existing enterprise project (resources in the specific enterprise project are required) or all_granted_eps (resources in all enterprise projects are queried). Multiple IDs can be queried in the format of enterprise_project_id=xxx&enterprise_project_id=xxx.

Request Parameters

**Table 3** Request header parameters
Parameter	Mandatory	Type	Description
X-Auth-Token	Yes	String	Specifies the token used for IAM authentication.

Response Parameters

Status code: 200

**Table 4** Response body parameters
Parameter	Type	Description
request_id	String	Specifies the request ID. The value is automatically generated.
page_info	PageInfo object	Shows pagination information.
healthmonitors	Array of HealthMonitor objects	Specifies the health check.

**Table 5** PageInfo
Parameter	Type	Description
previous_marker	String	Specifies the ID of the first record in the pagination query result.
next_marker	String	Specifies the ID of the last record in the pagination query result.
current_count	Integer	Specifies the number of records.

**Table 6** HealthMonitor
Parameter	Type	Description
admin_state_up	Boolean	Specifies the administrative status of the health check. true (default) indicates that the health check is enabled. false indicates that the health check is disabled.
delay	Integer	Specifies the interval between health checks, in seconds. The value ranges from 1 to 50. Minimum: 1 Maximum: 50
domain_name	String	Specifies the domain name that HTTP requests are sent to during the health check. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. The value is left blank by default, indicating that the virtual IP address of the load balancer is used as the destination address of HTTP requests. This parameter is available only when type is set to HTTP.
expected_codes	String	Specifies the expected HTTP status code. This parameter will take effect only when type is set to HTTP or HTTPS. The value options are as follows: A specific value, for example, 200 A list of values that are separated with commas (,), for example, 200, 202 A value range, for example, 200-204 The default value is 200. Multiple status codes can be queried in the format of expected_codes=xxx&expected_codes=xxx.
http_method	String	Specifies the HTTP method. The value can be GET, HEAD, POST, PUT, DELETE, TRACE, OPTIONS, CONNECT, or PATCH. The default value is GET. This parameter is available when type is set to HTTP or HTTPS. This parameter is unsupported. Please do not use it.
id	String	Specifies the health check ID.
max_retries	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. The value ranges from 1 to 10 Minimum: 1 Maximum: 10
max_retries_down	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. The value ranges from 1 to 10, and the default value is 3. Minimum: 1 Maximum: 10
monitor_port	Integer	Specifies the port used for the health check. If this parameter is left blank, a port of the backend server will be used by default. The port number ranges from 1 to 65535. Minimum: 1 Maximum: 65535
name	String	Specifies the health check name.
pools	Array of PoolRef objects	Lists the IDs of backend server groups for which the health check is configured. Only one ID will be returned.
project_id	String	Specifies the project ID.
timeout	Integer	Specifies the maximum time required for waiting for a response from the health check, in seconds. It is recommended that you set the value less than that of parameter delay. Minimum: 1 Maximum: 50
type	String	Specifies the health check protocol. The value can be TCP, UDP_CONNECT, HTTP, or HTTPS. Note: If the protocol of the backend server group is QUIC, the value can only be UDP_CONNECT. If the protocol of the backend server group is UDP, the value can only be UDP_CONNECT. If the protocol of the backend server group is TCP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server group is HTTP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server group is HTTPS, the value can only be TCP, HTTP, or HTTPS.
url_path	String	Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. The value can contain letters, digits, hyphens (-), slashes (/), periods (.), percentage signs (%), question marks (?), pound signs (#), ampersand signs (&), and the extended character set _;~!()[]@$^:',+. Note: This parameter is available only when type* is set to HTTP or HTTPS.
created_at	String	Specifies the time when the health check was configured. The format is yyyy-MM-dd'T'HH:mm:ss'Z' (UTC time). This is a new field in this version, and it will not be returned for resources associated with existing dedicated load balancers and for resources associated with existing and new shared load balancers.
updated_at	String	Specifies the time when the health check was updated. The format is yyyy-MM-dd'T'HH:mm:ss'Z' (UTC time). This is a new field in this version, and it will not be returned for resources associated with existing dedicated load balancers and for resources associated with existing and new shared load balancers.

**Table 7** PoolRef
Parameter	Type	Description
id	String	Specifies the ID of the backend server group.

Example Requests

Querying health checks

GET https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/healthmonitors

Example Responses

Status code: 200

Successful request.

{
  "healthmonitors" : [ {
    "monitor_port" : null,
    "id" : "c2b210b2-60c4-449d-91e2-9e9ea1dd7441",
    "project_id" : "99a3fff0d03c428eac3678da6a7d0f24",
    "domain_name" : null,
    "name" : "My Healthmonitor update",
    "delay" : 10,
    "max_retries" : 10,
    "pools" : [ {
      "id" : "488acc50-6bcf-423d-8f0a-0f4184f5b8a0"
    } ],
    "admin_state_up" : true,
    "timeout" : 30,
    "type" : "HTTP",
    "expected_codes" : "200",
    "url_path" : "/",
    "http_method" : "GET"
  }, {
    "monitor_port" : null,
    "id" : "cda1af03-0660-4fd2-8edf-e38c79846e08",
    "project_id" : "99a3fff0d03c428eac3678da6a7d0f24",
    "domain_name" : "akik..un.com",
    "name" : "lijunqiu",
    "delay" : 50,
    "max_retries" : 1,
    "pools" : [ {
      "id" : "ae6e45ba-be84-4074-8ac6-bc4a56484809"
    } ],
    "admin_state_up" : false,
    "timeout" : 3,
    "type" : "UDP_CONNECT",
    "expected_codes" : null,
    "url_path" : "/world",
    "http_method" : null
  } ],
  "page_info" : {
    "next_marker" : "cda1af03-0660-4fd2-8edf-e38c79846e08",
    "previous_marker" : "c2b210b2-60c4-449d-91e2-9e9ea1dd7441",
    "current_count" : 2
  },
  "request_id" : "814bc40e-8b0a-4ced-b8e5-f136c3e1df6a"
}

SDK Sample Code

The SDK sample code is as follows.

      
       
         
         
           package com.huaweicloud.sdk.test;

import com.huaweicloud.sdk.core.auth.ICredential;
import com.huaweicloud.sdk.core.auth.BasicCredentials;
import com.huaweicloud.sdk.core.exception.ConnectionException;
import com.huaweicloud.sdk.core.exception.RequestTimeoutException;
import com.huaweicloud.sdk.core.exception.ServiceResponseException;
import com.huaweicloud.sdk.elb.v3.region.ElbRegion;
import com.huaweicloud.sdk.elb.v3.*;
import com.huaweicloud.sdk.elb.v3.model.*;

import java.util.List;
import java.util.ArrayList;

public class ListHealthMonitorsSolution {

    public static void main(String[] args) {
        // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security.
        // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment
        String ak = System.getenv("CLOUD_SDK_AK");
        String sk = System.getenv("CLOUD_SDK_SK");

        ICredential auth = new BasicCredentials()
                .withAk(ak)
                .withSk(sk);

        ElbClient client = ElbClient.newBuilder()
                .withCredential(auth)
                .withRegion(ElbRegion.valueOf("<YOUR REGION>"))
                .build();
        ListHealthMonitorsRequest request = new ListHealthMonitorsRequest();
        request.withMarker("<marker>");
        request.withLimit(<limit>);
        request.withPageReverse(<page_reverse>);
        request.withId();
        request.withMonitorPort();
        request.withDomainName();
        request.withName();
        request.withDelay();
        request.withMaxRetries();
        request.withAdminStateUp(<admin_state_up>);
        request.withMaxRetriesDown();
        request.withTimeout(<timeout>);
        request.withType();
        request.withExpectedCodes();
        request.withUrlPath();
        request.withHttpMethod();
        request.withEnterpriseProjectId();
        try {
            ListHealthMonitorsResponse response = client.listHealthMonitors(request);
            System.out.println(response.toString());
        } catch (ConnectionException e) {
            e.printStackTrace();
        } catch (RequestTimeoutException e) {
            e.printStackTrace();
        } catch (ServiceResponseException e) {
            e.printStackTrace();
            System.out.println(e.getHttpStatusCode());
            System.out.println(e.getRequestId());
            System.out.println(e.getErrorCode());
            System.out.println(e.getErrorMsg());
        }
    }
}

          

        

      
     

      
       
         
         
           # coding: utf-8

from huaweicloudsdkcore.auth.credentials import BasicCredentials
from huaweicloudsdkelb.v3.region.elb_region import ElbRegion
from huaweicloudsdkcore.exceptions import exceptions
from huaweicloudsdkelb.v3 import *

if __name__ == "__main__":
    # The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security.
    # In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment
    ak = __import__('os').getenv("CLOUD_SDK_AK")
    sk = __import__('os').getenv("CLOUD_SDK_SK")

    credentials = BasicCredentials(ak, sk) \

    client = ElbClient.new_builder() \
        .with_credentials(credentials) \
        .with_region(ElbRegion.value_of("<YOUR REGION>")) \
        .build()

    try:
        request = ListHealthMonitorsRequest()
        request.marker = "<marker>"
        request.limit = <limit>
        request.page_reverse = <PageReverse>
        request.id = 
        request.monitor_port = 
        request.domain_name = 
        request.name = 
        request.delay = 
        request.max_retries = 
        request.admin_state_up = <AdminStateUp>
        request.max_retries_down = 
        request.timeout = <timeout>
        request.type = 
        request.expected_codes = 
        request.url_path = 
        request.http_method = 
        request.enterprise_project_id = 
        response = client.list_health_monitors(request)
        print(response)
    except exceptions.ClientRequestException as e:
        print(e.status_code)
        print(e.request_id)
        print(e.error_code)
        print(e.error_msg)

          

        

      
     

      
       
         
         
           package main

import (
	"fmt"
	"github.com/huaweicloud/huaweicloud-sdk-go-v3/core/auth/basic"
    elb "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3"
	"github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/model"
    region "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/region"
)

func main() {
    // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security.
    // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment
    ak := os.Getenv("CLOUD_SDK_AK")
    sk := os.Getenv("CLOUD_SDK_SK")

    auth := basic.NewCredentialsBuilder().
        WithAk(ak).
        WithSk(sk).
        Build()

    client := elb.NewElbClient(
        elb.ElbClientBuilder().
            WithRegion(region.ValueOf("<YOUR REGION>")).
            WithCredential(auth).
            Build())

    request := &model.ListHealthMonitorsRequest{}
	markerRequest:= "<marker>"
	request.Marker = &markerRequest
	limitRequest:= int32(<limit>)
	request.Limit = &limitRequest
	pageReverseRequest:= <page_reverse>
	request.PageReverse = &pageReverseRequest
	adminStateUpRequest:= <admin_state_up>
	request.AdminStateUp = &adminStateUpRequest
	timeoutRequest:= int32(<timeout>)
	request.Timeout = &timeoutRequest
	response, err := client.ListHealthMonitors(request)
	if err == nil {
        fmt.Printf("%+v\n", response)
    } else {
        fmt.Println(err)
    }
}

          

        

      
     