Updated on 2022-01-25 GMT+08:00

Error Code Description v2.0

Background Information

  • An error code returned by an API does not correspond to one error message. The following table lists only common error messages.
  • Most NAT Gateway APIs are asynchronous. Some error codes are displayed in the returned messages for task viewing requests. HTTP status codes may not be accurate.
  • The NAT Gateway service is strongly dependent on other services, such as network and storage. When error messages are provided for the NAT Gateway-depended services, contact technical support for troubleshooting.

Error Codes

Module

HTTP Status Code

Error Code

Description

Error Message

Handling Measure

Public

400

VPC.0002

The AZ is left blank.

Available zone Name is null.

Verify whether the availability_zone field in the request body for creating a subnet is empty.

404

VPC.0003

The VPC does not exist.

VPC does not exit.

Check whether the VPC ID is correct or whether the VPC exists under the tenant.

400

VPC.0004

The status of the VPC is abnormal.

VPC is not active, please try later.

Try again later or contact technical support.

400

VPC.0007

Inconsistent tenant IDs.

urlTenantId is not equal tokenTenantId

The tenant ID in the URL is different from that parsed in the token.

401

VPC.0008

Invalid token.

Invalid token in the header.

Check whether the token in the request header is valid.

401

VPC.0009

Real-name authentication fails.

real-name authentication fail.

Contact technical support.

403

VPC.2701

You do not have permission to perform this operation, or your account balance is insufficient.

Token not allowed to do this action.

Check whether the account balance is insufficient or whether your account has been frozen.

403

VPC.0010

Insufficient permissions to make calls to the underlying system.

Rules on xx by ** disallowed by policy

Obtain the required permissions.

403

VPC.2201

Insufficient fine-grained permissions.

Policy doesn't allow <x:x:x> to be performed

Obtain the required permissions.

400

VPC.0014

The enterprise project is unavailable.

This enterpriseProject status is disable.

Use the ID of another available enterprise project.

400

VPC.0011

Invalid enterprise project ID.

EnterpriseProjectId is invalid

Enter a valid enterprise project ID.

400

VPC.2048

Invalid timestamp.

Invalid value for created_at %(timestamp)s.

Enter the time in the correct format.

400

VPC.2002

Invalid request parameters.

Invalid parameters.

Enter the correct parameter.

400

VPC.2010

The default route already exists.

The router %(router_id)s has default route.

The router has a default route. Delete the default route and then create a NAT gateway.

400

VPC.2011

The router does not exist.

The router %(router_id)s does not exist.

Check whether the entered router ID is correct.

400

VPC.2009

The network does not exist.

Network %(network_id)s does not exist.

Enter a valid network ID.

400

VPC.2016

The rule has not been deleted.

Rule has not been deleted.

Contact technical support.

400

VPC.2049

The database is abnormal.

DB Error

Contact technical support.

400

VPC.2013

The subnet is not connected to the virtual router.

Router %(router)s has no port for subnet %(subnet)s.

Add the subnet to the router port.

400

VPC.2019

The resource is in use.

Resource %(res_type)s %(res)s is used by %(user_type)s %(user)s

Contact technical support.

400

VPC.2008

The network does not have any subnet.

Network %(network)s does not contain any IPv4 subnet

Contact technical support.

400

VPC.2012

The VPC already has a NAT gateway.

The router %(router_id)s already has nat gateway.

Select another VPC.

NAT Gateway

400

VPC.2000

NAT gateway request error.

Lack of user authority.

//request is null.

//endpoint is empty.

// resource type is invalid. //create natgateway requset is null. //update natgateway request is null

Contact technical support.

400

VPC.2030

The system is busy. Please try again later.

The system is busy. Please try again later.

Try again later.

400

VPC.2001

Incorrect NAT gateway parameter.

Request is invalid. //NatGateway id unvalid.

// the enterprise project id is unsupported.

// the enterprise project id in request is invalid. //parameter is null.

// tags is invalid.

// get natgateways error limit is invalid.

//get natgateways error marker is invalid.

//Only admin user can do this action. //Parameters are invalid, check them and try.

Enter the correct parameter or contact technical support.

400

VPC.2004

The NAT gateway is not activated.

NatGateway %(nat_gateway_id)s is not ACTIVE.

Check the gateway status. If the gateway is not in the running state for a long time, contact technical support.

400

VPC.2005

The NAT gateway is not in the UP state.

NatGateway %(nat_gateway_id)s is not UP.

The gateway may be frozen due to arrears.

400

VPC.2006

The NAT gateway is frozen.

NatGateway %(nat_gateway_id)s is frozen.can not update

The gateway may be frozen due to arrears and cannot be updated.

400

VPC.2007

The NAT gateway does not exist.

NatGateway %(nat_gateway_id)s does not exist.

The NAT gateway does not exist.

400

VPC.2050

Concurrent operation conflicts.

Concurrent conflict requests found

Contact technical support.

400

VPC.2051

Failed to create the internal port of the NAT gateway.

Create NG Port failed.

Internal error. Contact technical support.

400

VPC.2052

Failed to bind the internal port to the NAT gateway.

NG Port %(port)s is unbound.

Internal error. Contact technical support.

400

VPC.2053

The NAT gateway does not support IPv6.

NatGateway does not support IPv6.

The NAT gateway cannot be bound to an IPv6 EIP.

400

VPC.2045

An error occurred when selecting the gateway node.

Get Nat gateway host failed

Contact technical support.

400

VPC.2046

Failed to obtain the IP address of the gateway node.

Get Nat gateway agent local_ip failed

Contact technical support.

400

VPC.2047

Failed to obtain the VPC route table.

Get RouteTable %(router_id)s failed.

Contact technical support.

400

VPC.2012

The router already has a NAT gateway.

The router %(router_id)s already has nat gateway.

Select a router that has not been bound to a NAT gateway.

SNAT Rule

400

VPC.2014

Incorrect SNAT rule parameter.

Endpoint is null or empty. //Endpoint is Invalid.

//Request is null. //natGatewayId is invalid. //SnatRule id unvalid. //NatGatewayId is unvalid.

//Invalid value for public ip id.

//Endpoint is null.

//request is null.

//Query SnatRules list error marker is invalid.

Enter the correct parameter or contact technical support.

400

VPC.2031

The CIDR of the SNAT rule conflicts with the network.

Either network_id or cidr must be specified.Both can not be specified at the same time

Do not specify the Cidr and Network_id fields at the same time when configuring an SNAT rule.

400

VPC.2032

Invalid CIDR block.

cidr is invalid, make sure it's format is correct.

Enter a valid CIDR block, for example, 192.168.0.0/24.

400

VPC.2033

Invalid rule type.

source_type and network_id is incompatible.

If an SNAT rule is configured for a VPC, the parameter Source_Type is optional or set its value to 0.

If an SNAT rule is configured for a Direct Connect connection, Source_type must be set to 1.

400

VPC.2034

The CIDR block must be a subset of the VPC subnet CIDR block.

cidr must be a subset of subnet's cidr.

If an SNAT rule is configured for a VPC, the CIDR block must be the VPC subnet CIDR block. For example, if the subnet is 192.168.0.0/24, the CIDR block can be 192.168.0.0/25.

400

VPC.2035

The CIDR block conflicts with the subnet CIDR block.

cidr conflicts with subnet's cidr.

If an SNAT rule is configured for a Direct Connect connection, the CIDR block cannot conflict with the VPC subnet CIDR block.

400

VPC.2036

The CIDR block conflicts with the existing one.

cidr in the request conflicts with cidrs of existing rules.

Enter a CIDR block that does not conflict with existing ones.

400

VPC.2018

The rule already exists.

Snat rule for network %(network)s exists.

Select a subnet that is not configured with an SNAT rule.

400

VPC.2042

The EIP has been used by the SNAT rule.

There is a duplicate EIP %(fips)s in SNAT rule.

Select another EIP.

400

VPC.2044

The public IP address UUID of the SNAT rule is invalid.

Invalid input for floating_ip_id. Reason: \'%(fip)s\' is not a valid UUID.

Enter a valid UUID.

400

VPC.2040

The public IP address ID of an SNAT rule cannot be a null string.

Invalid value for public ip id.

Enter a valid ID.

400

VPC.2039

The number of EIPs associated with the SNAT rule exceeds the upper limit.

%(limit)s EIP has been associated to this SNAT rules's EIP pool, no more is allowed.

The number of EIPs associated with the SNAT rule exceeds the upper limit. For details, see the NAT Gateway API Reference.

DNAT Rule

400

VPC.2020

Incorrect DNAT rule parameter.

get dnatRules error limit is invalid.

//get dnatrules error marker is invalid.

//endpoint is empty.

//DnatRule id unvalid.

//VPC ID is invalid.

//Request is null.

//DnatRule id invalid.

//DnatRule natGatewayId id invalid.

Enter the correct parameter or contact technical support.

400

VPC.2054

Invalid DNAT rule protocol.

Dnat rule protocol %(protocol)s not supported.Only protocol values %(values)s and integer representations [6, 17, 0] are supported.

Configure a valid protocol. The value range can be 6, 17, or 0, corresponding to protocols TCP, UDP, and ANY, respectively.

400

VPC.2069

Invalid DNAT rule port.

Invalid value for port %(port)s

Configure a valid internal port and external port. The value ranges from 0 to 65535.

400

VPC.2023

The internal network information of the DNAT rule conflicts with the existing one.

The port_id, private_ip, internal port and protocol specified have been occupied.

Enter the VM port ID, private IP address, or internal port that does not conflict with the existing one.

400

VPC.2024

The external network information of the DNAT rule conflicts with the existing one.

The floating ip, external port and protocol specified have been occupied.

Enter the floating IP address ID, external port, or protocol that does not conflict with the existing one.

400

VPC.2070

The request information of the DNAT rule is incorrect when Port Type is set to All ports.

The external port equals 0 and internal port equls 0 and protocol equals any must satisfied at the same time.

Set both the internal port and the external port to 0 and the protocol is ANY.

400

VPC.2027

The port ID of the DNAT rule conflicts with that of an existing DNAT rule.

The port_id already existing dnat allport rules or dnat_rules, can no longer create dnat rules or dnat allport rules.

Change the VM port ID to create or modify the DNAT rule.

400

VPC.2028

The private IP address of the DNAT rule conflicts with that of an existing DNAT rule.

The private_ip already existing dnat allport rules or dnat rules, can no longer create dnat rules or dnat allport rules.

The private IP address conflicts with the existing DNAT rule. Change the private IP address or modify the DNAT rule.

400

VPC.2029

The DNAT rule has been frozen and cannot be modified.

DNAT rule is frozen, can no longer update.

Check whether the floating IP address bound to the DNAT rule is in arrears or whether the user account is in arrears.

400

VPC.2038

The maximum number of DNAT rules allowed to be associated has been reached.

%(limit)s DNAT rules has been associated to this NAT Gateway, no more is allowed

The maximum number of DNAT rules allowed to be associated with the NAT gateway has been reached.

400

VPC.2055

The DNAT rule contains mutually exclusive parameters.

The port_id and private_ip exist at the same time and value is not empty, but at least one value is empty.

The VM port ID and private IP address cannot be configured at the same time.

400

VPC.2056

The DNAT rule does not have required parameters configured.

The port_id and private_ip values are both empty, at least one value is not empty.

Configure the VM port ID and private IP address.

400

VPC.2071

Invalid private IP address of the DNAT rule.

The private ip address is not legal.

Configure a valid private IP address.

400

VPC.2037

This virtual IP address is not supported.

The virtual IP address is not supported.

Configure a valid private IP address.

400

VPC.2026

The maximum number of DNAT rules allowed to be associated has been reached.

%(limit)s DNAT rules has been associated to this Floating IP, no more is allowed

The maximum number of DNAT rules allowed to be associated with a floating IP address has been reached.

400

VPC.2057

The maximum number of DNAT rules allowed to be created in batches exceeds the upper limit.

batch create dnat rules max limit: %(limit)s

The maximum number of DNAT rules allowed to be created in batches exceeds the upper limit.

400

VPC.2022

Invalid VM port ID of the DNAT rule.

Port %(port)s is not a valid port.

Configure a valid VM port ID.

400

VPC.2058

The value of VtepIp must be specified.

Vtep_ip is Null.

Contact technical support.

400

VPC.2075

The description contains more than 255 characters.

Enter a maximum of 255 characters.

Enter a maximum of 255 characters.

EIP

400

VPC.2059

The EIP is frozen.

Floating Ip %(fip)s is freezed.

Select an EIP that has not been frozen.

400

VPC.2060

The EIP has been associated with a port.

Floating Ip %(fip)s has associated with port %(port)s.

Select an EIP that has not been bound to any other object. For example, if an EIP has been bound to an ECS, it cannot be bound to a NAT gateway.

400

VPC.2061

The EIP has been associated with a NAT gateway.

Floating Ip %(fip)s has used by nat gateway %(nat_gateway)s.

The EIP has been bound to a NAT gateway. Select another one.

400

VPC.2062

The EIP is in use.

Floating Ip %(fip)s has been occupied.

The EIP has been bound to a NAT gateway. Select another one.

400

VPC.2074

An EIP cannot be associated with an SNAT rule and a DNAT rule with Port Type set to All ports at the same time.

Floating Ip %(fip)s can not be associated with both SNAT rule and DNAT all port rule.

Do not associate an EIP with an SNAT rule and a DNAT rule with Port Type set to All ports at the same time.

400

VPC.2073

An EIP cannot be associated with a DNAT rule and a DNAT rule with Port Type set to All ports at the same time.

Floating Ip %(fip)s can not be associated with both DNAT rule and DNAT all port rule.

Do not associate an EIP with a DNAT rule and a DNAT rule with Port Type set to All ports at the same time.

400

VPC.2043

The EIP has been associated with a rule.

Floating Ip %(fip)s is used by other rules

Select an EIP that is not in use.