Help Center/ Object Storage Service/ User Guide/ Object Management/ Deleting Objects/ Deleting an Object
Updated on 2025-12-16 GMT+08:00
View PDF
Share

Deleting an Object

Scenarios

To save space and reduce costs, you can use OBS Console, APIs, SDKs, OBS Browser+, or obsutil to delete unwanted objects.

This section describes how to manually delete files or folders. For details about the comparison between manual and automatic deletion, see Table 1.

Table 1 Object deletion methods

Method

Description

Rule

Manual deletion

Manual deletion is recommended for deleting a few or irregular objects.
  • Individual deletion
  • Batch deletion

Automatic deletion

To delete a large number of objects at a time or delete some objects periodically, you can configure a lifecycle rule.

In big data scenarios, parallel file systems usually have deep directory levels and each directory has a large number of files. In such cases, deleting directories from parallel file systems may fail due to timeout. To address this problem, you are advised to delete directories in either of the following ways:

  1. On the Hadoop client that has OBSA, an OBS client plugin, embedded, run the hadoop fs - rmr obs://{Name of a parallel file system}/{Directory name} command.
  2. Configure a lifecycle rule for directories so that they can be deleted in background based on the preset lifecycle rule.

Deleting Objects from a Bucket with Versioning Disabled, Suspended, or Enabled

Deleting objects may cause data loss. Exercise caution when performing this operation. Versioning can reduce the risk by restoring objects that are accidentally deleted or overwritten.

Scenario

Deleting the Current Object Version

Deleting a Historical Object Version

A versioning-disabled bucket

OBS permanently deletes objects. Deleted objects cannot be recovered.

N/A

A versioning-suspended bucket
  • If an object's current version does not have a delete marker and its version ID is not null, the object deletion operation turns the current version into a historical version and inserts a delete marker with an ID of null. The delete marker then becomes the current version.
  • If an object's current version does not have a delete marker and its version ID is null, the object deletion operation inserts a delete marker with an ID of null that overwrites the current version. The delete marker then becomes the current version, and the overwritten version cannot be recovered.
  • If the current version has a delete marker, no action is taken.
    NOTE:
    • After versioning is suspended, a newly uploaded object will have a version ID of null. If the newly uploaded object has the same name as an existing object with a null version ID, this new object will overwrite the existing object. For more information about versioning, see Versioning.
    • By enabling Historical Versions in the object list, you can view the version ID of an object.

Deleted historical versions cannot be recovered.

A versioning-enabled bucket
  • If an object's current version does not have a delete marker, the object deletion operation inserts a delete marker. Then, the current version becomes a historical version and the delete marker becomes the current version.
  • If an object's current version has a delete marker, permanently deleting the current version recovers the object.

Deleted historical versions cannot be recovered.

Ways to Delete Objects

You can use OBS Console, APIs, SDKs, OBS Browser+, or obsutil to delete files or folders.

Using OBS Console

  1. In the navigation pane of OBS Console, choose Object Storage.
  2. In the bucket list, click the bucket you want to operate. The Objects page is displayed.
  3. Select the file or folder you want to delete and choose More > Delete on the right.

    You can select multiple files or folders and click Delete above the object list to delete them in a batch.

    Figure 1 Deleting a file or folder

  4. Click OK to confirm the deletion.

    Figure 2 Deleting objects

    If you delete an object from a bucket with versioning enabled, the object is not permanently deleted but retained in the Deleted Objects list. All versions of the object are still kept in the bucket and are billed for storage. If you need to permanently delete the object, see the following steps.

  5. Permanently delete an object or a folder from an OBS bucket with versioning enabled:

    1. Enable Historical Versions.
    2. Select all the versions of the object to be permanently deleted and click Permanently Delete above the search bar.
      Figure 3 Permanently deleting an object
    3. Click OK.

Using APIs

Deleting an Object

Using SDKs

Java

Python

C

Go

BrowserJS

.NET

Android

iOS

PHP

Node.js

Using the GUI Tool - OBS Browser+

  1. Log in to OBS Browser+.
  2. Go to the bucket from which you want to delete a file or folder.
  3. Right-click the file or folder to be deleted and click Delete.

    You can select multiple files or folders and choose More > Delete above the list to batch delete them.

  4. In the displayed dialog box, click Yes.

Using the CLI Tool - obsutil

Command Line Structure

  • In Windows
    • Deleting a single object 
      obsutil rm obs://bucket/key [-f] [-versionId=xxx] [-fr] [-o=xxx] [-config=xxx] [-e=xxx] [-i=xxx] [-k=xxx] [-t=xxx]
    • Deleting objects in batches 
      obsutil rm obs://bucket/[key] -r [-j=1] [-f] [-v] [-o=xxx] [-config=xxx] [-e=xxx] [-i=xxx] [-k=xxx] [-t=xxx]
  • In Linux or macOS
    • Deleting a single object 
      ./obsutil rm obs://bucket/key [-f] [-versionId=xxx] [-fr] [-o=xxx] [-config=xxx] [-e=xxx] [-i=xxx] [-k=xxx] [-t=xxx]
    • Deleting objects in batches 
      ./obsutil rm obs://bucket/[key] -r [-j=1] [-f] [-v] [-o=xxx] [-config=xxx] [-e=xxx] [-i=xxx] [-k=xxx] [-t=xxx]

Examples

  • Take the Windows OS as an example. Run the obsutil rm obs://bucket-test/key -f command to delete a single object named key in bucket bucket-test. 
    obsutil rm obs://bucket-test/key -f

Start at 2024-09-25 04:48:10.1147483 +0000 UTC

Delete object [key] in the bucket [bucket-test] successfully, cost [152], request id [0000016979E1D2B2860BB5181229C72C]
  • Take the Windows OS as an example. Run the obsutil rm obs://bucket-test -r -f command to delete all objects in bucket bucket-test. 
    obsutil rm obs://bucket-test -r -f
Start at 2024-09-30 08:46:55.5335644 +0000 UTC

[===============================================] 100.00% 21s
Succeed count:   1313      Failed count:    0
Task id: 95936984-f81a-441a-bba0-1fd8254d9241
  • Take the Windows OS as an example. Run the obsutil rm obs://bucket-test/key -r -f command to delete all objects and folders prefixed with key in bucket bucket-test. 
    obsutil rm obs://bucket-test/key -r -f
Start at 2024-09-30 08:49:09.5602115 +0000 UTC

[===============================================] 100.00% 21s
Succeed count:   10      Failed count:    0
Task id: 79ab59ec-7e00-4f22-8c88-465faa834125

Parameter Description

Parameter

Optional or Mandatory

Description

bucket

Mandatory

The bucket name

key

Mandatory for deleting a single object.

Optional for deleting objects in batches.

The name of the object to be deleted, or the name prefix of the objects to be deleted in batches

NOTE:

If this parameter is left blank when deleting objects in batches, all objects in the bucket are deleted.

fr

Optional for deleting a single object (additional parameter)

Generates an operation result file when deleting an object.

f

Optional (additional parameter)

Runs in force mode.

versionId

Optional for deleting a single object (additional parameter)

The version ID of the object to be deleted.

r

Mandatory for deleting objects in batches (additional parameter)

Deletes objects in batches based on a specified object name prefix.

CAUTION:

When you batch delete objects, all objects with the specified prefix will be deleted.

j

Optional for deleting objects in batches (additional parameter)

The maximum number of concurrent tasks for deleting objects in batches. The default value is the value of defaultJobs in the configuration file.

NOTE:

The value is ensured to be greater than or equal to 1.

v

Optional for deleting objects in batches (additional parameter)

Deletes versions of an object and the delete markers in batches based on a specified object name prefix.

o

Optional (additional parameter)

The folder that stores the result files. After the command is executed, result files (possibly success and failure files) will be created in the specified folder. The default value is .obsutil_output, a subfolder in the user's home directory where obsutil commands are executed.

NOTE:
  • A result file should be named as follows: rm_{succeed | failed}_report_time_TaskId.txt.
  • By default, the maximum size of a single result file is 30 MB and the maximum number of result files that can be retained is 1,024. You can set the maximum size and number by configuring recordMaxLogSize and recordBackups in the configuration file.
  • If there are multiple folders and files and you need to confirm the details of a failed task, refer to the failure result file cp_failed_report_time_TaskId.txt in the result folder and the log files in the log path.

config

Optional (additional parameter)

The user-defined configuration file for executing the current command. For details about parameters that can be configured, see Configuration Parameters.

e

Optional (additional parameter)

The endpoint

i

Optional (additional parameter)

The user's AK

k

Optional (additional parameter)

The user's SK

t

Optional (additional parameter)

The user's security token

Response

Field

Description

Parallel

The parameter -p in the request

Jobs

The parameter -j in the request

Threshold

The parameter -threshold in the request

PartSize

The parameter -ps in the request

Exclude

The parameter -exclude in the request

Include

The parameter -include in the request

TimeRange

The parameter -timeRange in the request

VerifyLength

The parameter -vlength in the request

VerifyMd5

The parameter -vmd5 in the request

CheckpointDir

The parameter -cpd in the request

OutputDir

The parameter -o in the request

ArcDir

The parameter -arcDir in the request

Succeed count

The number of successful tasks

Failed count

The number of failed tasks

Skip count

The number of tasks that are skipped during incremental upload, download, or copy, and synchronous upload, download, or copy.

NOTE:

Skipped tasks are recorded into successful tasks.

Warning count

The number of tasks that are executed successfully but contain warnings.

NOTE:
  • The task for which a warning is generated may be a failure or a success, which needs to be further determined according to the corresponding result list.
  • The number of tasks that generate warnings is independent of the number of successful or failed tasks. The total number of tasks is the number of successful tasks plus the number of failed tasks.

Succeed bytes

The number of bytes that are successfully uploaded or downloaded.

max cost

The maximum duration of all tasks, in ms

min cost

The minimum duration of all tasks, in ms

average cost

The average duration of all tasks, in ms

average tps

The average number of tasks completed per second

Task id

The unique ID of an operation, which is used to search for the result file generated for a batch task

Parent Topic: Deleting Objects