Help Center/ MapReduce Service/ User Guide/ MRS Cluster O&M/ MRS Cluster Alarm Handling Reference/ ALM-12001 Audit Log Dump Failure (For MRS 2.x or Earlier)
Updated on 2024-09-23 GMT+08:00

ALM-12001 Audit Log Dump Failure (For MRS 2.x or Earlier)

Description

Cluster audit logs need to be dumped on a third-party server due to the local historical data backup policy. Audit logs can be successfully dumped if the dump server meets the configuration conditions. This alarm is generated when the audit log dump fails because the disk space of the dump directory on the third-party server is insufficient or a user changes the username, password, or dump directory of the dump server.

Attribute

Alarm ID

Alarm Severity

Auto Clear

12001

Minor

Yes

Parameters

Parameter

Description

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

The system can only store a maximum of 50 dump files locally. If the fault persists on the dump server, the local audit log may be lost.

Possible Causes

  • The network connection is abnormal.
  • The username, password, or dump directory of the dump server does not meet the configuration conditions.
  • The disk space of the dump directory is insufficient.

Procedure

  1. Check whether the username, password, and dump directory are correct.

    1. Check on the dump configuration page of MRS Manager to see if they are correct.
      • If yes, go to 3.
      • If no, go to 1.b.
    2. Change the username, password, or dump directory, and click OK.
    3. Wait 2 minutes and check whether the alarm is cleared.
      • If yes, no further action is required.
      • If no, go to 2.

  2. Reset the dump rule.

    1. On MRS Manager, choose System > Dump Audit Log.
    2. Reset dump rules, set the parameters properly, and click OK.
    3. Wait 2 minutes and check whether the alarm is cleared.
      • If yes, no further action is required.
      • If no, go to 3.

  3. Collect fault information.

    1. On MRS Manager, choose System > Export Log.
    2. Contact the O&M engineers and send the collected logs.

Reference

N/A