Querying a Trace List

Function

This API is used to query records of operations on resources in the last seven days.

URI

GET /v3/{project_id}/traces

**Table 1** Path Parameters
Parameter	Mandatory	Type	Description
project_id	Yes	String	Project ID. For details, see section "Obtaining the Account ID and Project ID" in Cloud Trace Service API Reference.

**Table 2** Query Parameters
Parameter	Mandatory	Type	Description
trace_type	Yes	String	Trace type. The value can be system (management trace) or data (data trace). The default value is system. Enumeration values: system data
limit	No	Integer	Number of traces to query. The default value is 10 and the maximum value is 200.
from	No	Long	UTC millisecond timestamp of the query start time. The value contains 13 numbers and the default value is the timestamp of the last hour. Traces generated after the specified timestamp will be queried. The parameters from and to should be used together.
next	No	String	This parameter is used to query traces generated earlier than its specified value. The value can be that of marker in the response. next can be used with from and to. Traces generated in the overlap of the two time ranges specified respectively by next and by from and to will be returned.
to	No	Long	UTC millisecond timestamp of the query end time. The value contains 13 numbers and the default value is the timestamp of the current time. Traces generated before the specified timestamp will be queried. The parameters to and from should be used together.
tracker_name	No	String	When trace_type is set to system, the value of this parameter is system. When trace_type is set to data, set this parameter to the name of a data tracker to query the traces recorded by this tracker.
service_type	No	String	Cloud service whose traces are to be queried. The value must be the abbreviation of a cloud service that has been connected with CTS. It is a word composed of uppercase letters. This parameter is valid only when trace_type is set to system. For cloud services that have been connected with CTS, see section "Supported Services and Operation Lists" in the Cloud Trace Service User Guide.
user	No	String	Name of a user whose traces are to be queried. This parameter is valid only when trace_type is set to system.
resource_id	No	String	Cloud resource whose traces are to be queried. This parameter is valid only when trace_type is set to system.
resource_name	No	String	Name of a resource whose traces are to be queried. This parameter is valid only when trace_type is set to system. The value can contain uppercase letters.
resource_type	No	String	Type of a resource whose traces are to be queried. This parameter is valid only when trace_type is set to system.
trace_id	No	String	Trace ID. If this parameter is specified, other query criteria will not take effect. This parameter is valid only when trace_type is set to system.
trace_name	No	String	Trace name. This parameter is valid only when trace_type is set to system. The value can contain uppercase letters.
trace_rating	No	String	Trace status. The value can be normal, warning, or incident. This parameter is valid only when trace_type is set to system. Enumeration values: normal warning incident

Request Parameters

None

Response Parameters

Status code: 200

**Table 3** Response body parameters
Parameter	Type	Description
traces	Array of Traces objects	Returned list of traces.
meta_data	MetaData object	Number of returned traces and the marker.

**Table 4** Traces
Parameter	Type	Description
resource_id	String	ID of the cloud resource on which the recorded operation was performed.
trace_name	String	Trace name. The value contains 1 to 64 characters and must start with a letter. Only letters, numbers, hyphens (-), underscores (_), and periods (.) are allowed.
trace_rating	String	Trace status. The value can be normal, warning, or incident. Enumeration values: normal warning incident
trace_type	String	Trace source. For management traces, the value can be ApiCall, ConsoleAction, or SystemAction.For data traces, the value can be ObsSDK or ObsAPI.
request	String	Request body of the recorded operation.
response	String	Response body of the recorded operation.
code	String	Returned HTTP status code of the recorded operation.
api_version	String	Version of the API called in the trace.
message	String	Remarks added by other cloud services to the trace.
record_time	Long	Timestamp when a trace was recorded by CTS.
trace_id	String	Trace ID. The value is the UUID generated by the system.
time	Long	Timestamp when a trace was generated.
user	UserInfo object	Information of the user who performed the operation that triggered the trace.
service_type	String	Cloud service on which the recorded operation was performed. The value must be the acronym of a cloud service that has been connected with CTS. It is a word composed of uppercase letters.
resource_type	String	Type of the resource on which the recorded operation was performed.
source_ip	String	IP address of the tenant who performed the operation that triggered the trace.
resource_name	String	Name of the resource on which the recorded operation was performed.
request_id	String	ID of the request of the recorded operation.
location_info	String	Information required for fault locating after a request error occurred.
endpoint	String	Endpoint in the details page URL of the cloud resource on which the recorded operation was performed.
resource_url	String	Details page URL (excluding the endpoint) of the cloud resource on which the recorded operation was performed.

**Table 5** UserInfo
Parameter	Type	Description
id	String	Account ID. For details, see section "Obtaining the Account ID and Project ID" in Cloud Trace Service API Reference.
name	String	Account name.
domain	BaseUser object	Domain information of the user who performed the operation that triggered the trace.

**Table 6** BaseUser
Parameter	Type	Description
id	String	Account ID. For details, see section "Obtaining the Account ID and Project ID" in Cloud Trace Service API Reference.
name	String	Account name.

**Table 7** MetaData
Parameter	Type	Description
count	Integer	Number of returned traces.
marker	String	ID of the last trace returned. The value of this parameter can be used as the value of next. If the value of marker is null, all traces have been returned under the specified query criteria.

Status code: 400

**Table 8** Response body parameters
Parameter	Type	Description
error_code	String	Error code, in the format of CTS.XXX.
error_msg	String	Error message.

Example Requests

Querying management traces

GET https://{endpoint}/v3/{project_id}/traces?limit=11&to=1479095278000&from=1478490478000&trace_name=createTracker&resource_type=tracker&service_type=CTS&trace_type=system

Querying data traces

GET https://{endpoint}/v3/{project_id}/traces?limit=11&to=1479095278000&from=1478490478000&trace_type=data

Example Responses

Status code: 200

The request is successful.

{
  "meta_data" : {
    "count" : 2,
    "marker" : "e001ccb8-bc09-11e6-b2cc-2640a43cc6e8"
  },
  "traces" : [ {
    "time" : 1472148708232,
    "user" : {
      "name" : "xxx",
      "domain" : {
        "name" : "xxx",
        "id" : "ded649d814464428ba89d04d7955c93e"
      }
    },
    "response" : {
      "code" : "VPC.0514",
      "message" : "Update port fail."
    },
    "code" : 200,
    "service_type" : "VPC",
    "resource_type" : "eip",
    "resource_name" : "192.144.163.1",
    "resource_id" : "d502809d-0d1d-41ce-9690-784282142ccc",
    "trace_name" : "deleteEip",
    "trace_rating" : "warning",
    "trace_type" : "ConsoleAction",
    "api_version" : "2.0",
    "record_time" : 1481066128032,
    "trace_id" : "e001ccb9-bc09-11e6-b00b-4b2a61338db6"
  }, {
    "time" : 1472148708232,
    "user" : {
      "name" : "xxx",
      "domain" : {
        "name" : "xxx",
        "id" : "ded649d814464428ba89d04d7955c93e"
      }
    },
    "response" : {
      "code" : "VPC.0514",
      "message" : "Update port fail."
    },
    "code" : 200,
    "service_type" : "VPC",
    "resource_type" : "eip",
    "resource_name" : "192.144.163.1",
    "resource_id" : "d502809d-0d1d-41ce-9690-784282142ccc",
    "trace_name" : "deleteEip",
    "trace_rating" : "warning",
    "trace_type" : "ConsoleAction",
    "api_version" : "2.0",
    "record_time" : 1481066128032,
    "trace_id" : "e001ccb8-bc09-11e6-b2cc-2640a43cc6e8"
  } ]
}

Status Codes

Status Code	Description
200	The request is successful.
400	The query parameters are abnormal.
401	The request is rejected due to authentication failure.
403	The server understood the request but refused to authorize it.
404	The requested trace does not exist.
500	The server has received the request but encountered an internal error.
503	The requested service is unavailable. The client should not repeat the request without modifications.