ALM-303046738 the AP Works in Limited Mode Due to Insufficient Power Supply

Description

ENTITYTRAP/4/AP_POWER_LIMITED:OID [OID] The AP works in Limited mode due to insufficient power supply.(APWorkMode=[OCTET], ExpectWorkMode=[OCTET])

The AP power supply is insufficient, and the AP works in Limited mode.

Attribute

Alarm ID	Alarm Severity	Alarm Type
303046738	Warning	equipmentAlarm

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APWorkMode	Indicates the actual power supply mode of an AP.
ExpectWorkMode	Indicates the expected power supply mode of an AP.

Impact on the System

When an AP works with low power consumption, some component functions such as the USB and PoE out functions are disabled. In addition, radio power is reduced, or radios are disabled. For details, see the functions of APs using different power supply standards in Device Management Configuration GuidePoE ConfigurationUnderstanding PoE in the FATAP, Cloud APV200R019C10 Configuration Guide.

Possible Causes

The device that supplies power to the AP does not meet the AP's power supply requirements.

Procedure

Run the lldp enable command in the interface view to enable the LLDP function. In this way, the peer power supply device can identify the power supply standard of the local device and supply power as required.
- If the alarm persists, go to step 2.
- If the alarm is cleared, go to step 4.
Check the peer power supply device and ensure that the power supply standard meets the AP's power supply requirements.
- If the alarm persists, go to step 3.
- If the alarm is cleared, go to step 4.
Collect alarm and configuration information, and contact technical support personnel.
End.