Creating a VPC Endpoint

Function

This API is used to create a VPC endpoint for accessing a VPC endpoint service.

URI

POST /v1/{project_id}/vpc-endpoints

Request

• Parameter description

  Table 2 Request parameters

  Parameter	Mandatory	Type	Description
  subnet_id	No NOTE: This parameter is mandatory to create an interface VPC endpoint.	String	The ID must be the ID of the subnet created in the VPC specified by vpc_id and in the format of UUID. For details, see response field id in section "Querying Subnet Details" in the Virtual Private Cloud API Reference. This parameter is mandatory only when you create a VPC endpoint for connecting to an interface VPC endpoint service. NOTE: The CIDR block of the VPC subnet cannot overlap with 198.19.128.0/17. The destination address of the custom route in the VPC route table cannot overlap with 198.19.128.0/17.
  endpoint_service_id	Yes	String	Specifies the ID of the VPC endpoint service. You can obtain the ID of the VPC endpoint service to be connected by performing operations in Querying Basic Information of a VPC Endpoint Service.
  vpc_id	Yes	String	Specifies the ID of the VPC where the VPC endpoint is to be created. For details, see response field id in section "Querying VPC Details" in the Virtual Private Cloud API Reference.
  enable_dns	No	Boolean	Specifies whether to create a private domain name. true: A private domain name is created. false: A private domain name is not created. The default value is false. NOTE: When a VPC endpoint for connecting to a gateway VPC endpoint service is created, no private domain name is created no matter enable_dns is set to true or false.
  tags	No	Array of objects	Lists the resource tags. For details, see Table 3. A maximum of 10 tags can be added to each VPC endpoint.
  routetables	No	Array of String	Lists the IDs of route tables. For details, see response field id in section "Querying a VPC Route" in the Virtual Private Cloud API Reference. This parameter is mandatory only when you create a VPC endpoint for connecting to a gateway VPC endpoint service. NOTE: If this parameter is not configured, use the default route table.
  port_ip	No	String	Specifies the IP address for accessing the associated VPC endpoint service. You can specify IP addresses for accessing the associated VPC endpoint service when creating a VPC endpoint. Only IPv4 addresses are supported. This parameter is mandatory only when you create a VPC endpoint for connecting to an interface VPC endpoint service.
  whitelist	No	Array of strings	Specifies the whitelist for controlling access to the VPC endpoint. IPv4 addresses or CIDR blocks can be specified to control access when you create a VPC endpoint. This parameter is available only when you create a VPC endpoint for connecting to an interface VPC endpoint service.
  enable_whitelist	No	Boolean	Specifies whether access control is enabled.

  Table 3 ResourceTags parameters

  Parameter	Mandatory	Type	Description
  key	No	String	Specifies the tag key. A tag key contains a maximum of 36 Unicode characters. This parameter cannot be left blank. It cannot contain characters =*<>\,|/ nor start or end with a space.
  value	No	String	Specifies the tag value. A tag value contains a maximum of 43 Unicode characters and can be left blank. It cannot contain characters =*<>\,|/ nor start or end with a space.

• Example request

  POST https://{endpoint}/v1/{project_id}/vpc-endpoints

  { 
  "subnet_id": "68bfbcc1-dff2-47e4-a9d4-332b9bc1b8de",
  "vpc_id": "84758cf5-9c62-43ae-a778-3dbd8370c0a4",
  "tags":[
              {
                  "key":"test1",
                  "value":"test1"
              }
         ],
  "endpoint_service_id":"e0c748b7-d982-47df-ba06-b9c8c7650c1a",
  "enable_dns":true
  }

Response

• Parameter description

  Table 4 Response parameters

  Parameter	Type	Description
  id	String	Specifies the unique ID of the VPC endpoint.
  service_type	String	Specifies the type of the VPC endpoint service that is associated with the VPC endpoint. Gateway: VPC endpoint services of this type are configured by operations people. You can use them directly without the need to create one by yourselves. Interface: VPC endpoint services of this type include cloud services configured by operations people and private services created by yourselves. You cannot configure these cloud services, but can use them. You can view those VPC endpoint services that are configured by operations people and are visible and accessible to all users. For detailed steps, see Querying Public VPC Endpoint Services. Perform the operations in Creating a VPC Endpoint Service to create an interface VPC endpoint service.
  status	String	Specifies the connection status of the VPC endpoint. pendingAcceptance: The VPC endpoint is pending acceptance. creating: The VPC endpoint is being created. accepted: The VPC endpoint has been accepted. rejected: The VPC endpoint has been rejected. failed: The VPC endpoint failed to be created.
  active_status	String	Specifies the domain status. arrear_frozen: frozen due to arrears verify_frozen: frozen due to lack of real-name authentification police_frozen: frozen for legal management illegal_frozen: frozen due to abuse partner_frozen: frozen for partnership active: The domain is normal.
  endpoint_service_name	String	Specifies the name of the VPC endpoint service.
  marker_id	Integer	Specifies the packet ID of the VPC endpoint.
  endpoint_service_id	String	Specifies the ID of the VPC endpoint service.
  enable_dns	Boolean	Specifies whether to create a private domain name. true: A private domain name is created. false: A private domain name is not created. NOTE: When a VPC endpoint for connecting to a gateway VPC endpoint service is created, no private domain name is created no matter enable_dns is set to true or false.
  dns_names	Array of strings	Specifies the domain name for accessing the associated VPC endpoint service. This parameter is only available when enable_dns is set to true.
  subnet_id	String	Specifies the ID of the subnet in the VPC specified by vpc_id. The ID is in the UUID format.
  vpc_id	String	Specifies the ID of the VPC where the VPC endpoint is to be created.
  created_at	String	Specifies the creation time of the VPC endpoint. The UTC time format is used: YYYY-MM-DDTHH:MM:SSZ.
  updated_at	String	Specifies the update time of the VPC endpoint. The UTC time format is used: YYYY-MM-DDTHH:MM:SSZ.
  project_id	String	Specifies the project ID. For details about how to obtain the project ID, see Obtaining a Project ID.
  tags	Array of objects	Lists the resource tags. For details, see Table 5.
  whitelist	Array of strings	Specifies the whitelist for controlling access to the VPC endpoint. If you do not specify this parameter, an empty whitelist is returned. This parameter is available only when you create a VPC endpoint for connecting to an interface VPC endpoint service.
  enable_whitelist	Boolean	Specifies whether access control is enabled. true: Access control is enabled. false: Access control is disabled. If you do not specify this parameter, the whitelist is not enabled. This parameter is available only when you create a VPC endpoint for connecting to an interface VPC endpoint service.
  routetables	Array of strings	Lists the IDs of route tables. If you do not specify this parameter, the route table ID of the VPC is returned. This parameter is available only when you create a VPC endpoint for connecting to a gateway VPC endpoint service.
  enable_status	String	Specifies whether to enable the endpoint. enable: The endpoint will be enabled. disable: The endpoint will be disabled.

  Table 5 ResourceTags parameters

  Parameter	Type	Description
  key	String	Specifies the tag key. A tag key contains a maximum of 36 Unicode characters. This parameter cannot be left blank. It cannot contain characters =*<>\,|/ nor start or end with a space.
  value	String	Specifies the tag value. A tag value contains a maximum of 43 Unicode characters and can be left blank. It cannot contain characters =*<>\,|/ nor start or end with a space.

Status Code

For details about status codes, see Status Code.