Help Center/ MapReduce Service/ User Guide/ Alarm Reference (Applicable to MRS 3.x)/ ALM-45653 Invalid Flink HA Certificate File
Updated on 2024-04-11 GMT+08:00

ALM-45653 Invalid Flink HA Certificate File

This section applies to MRS 3.3.0 or later.

Alarm Description

Flink checks whether the HA certificate file is valid (whether the certificate exists and whether its format is correct) in the first health check or at 01:00:00 every day. This alarm is generated when the certificate file is invalid. This alarm is automatically cleared when the certificate file becomes valid again.

Alarm Attributes

Alarm ID

Alarm Severity

Auto Cleared

45653

Major

Yes

Alarm Parameters

Parameter

Description

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

Some functions are unavailable.

Possible Causes

The HA certificate file is invalid.

Handling Procedure

View alarm information.

  1. Log in to FusionInsight Manager, choose O&M > Alarm > Alarms > ALM-45653 Invalid Flink HA Certificate File, view Location, obtain the name of the host for which the alarm is generated, and click the host name to view its IP address.

Check whether the HA certificate file in the system is valid.

  1. Log in to the host for which the alarm is generated as user omm.
  2. Run the cd ${BIGDATA_HOME}/FusionInsight_Flink_*/install/FusionInsight-Flink-*/ha/local/cert command to go to the directory where the HA certificate is stored.
  3. Run the ls -l command to check whether the server.crt file exists.

    • If yes, go to 5.
    • If no, go to 6.

  4. Run the openssl x509 -in server.crt -text -noout command and check whether the command output is normal.

    • If yes, go to 9.
    • If no, go to 6.

  5. Run the cd ${BIGDATA_HOME}/FusionInsight_Flink_*/install/FusionInsight-Flink-*/flink/sbin command to go to the Flink script directory.
  6. Run the sh proceed_ha_ssl_cert.sh command to generate a new HA certificate. Then, check whether the alarm is cleared 1 minute later.

    • If yes, go to 8.
    • If no, go to 9.

  7. Check whether this alarm is generated again during periodic system check.

    • If yes, go to 9.
    • If no, no further action is required.

Collect fault information.

  1. On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Log > Download.
  2. Expand the Service drop-down list, and select Flink for the target cluster.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact O&M personnel and provide the collected logs.

Alarm Clearance

This alarm is automatically cleared after the fault is rectified.

Related Information

None.