Help Center/ MapReduce Service/ User Guide/ Alarm Reference (Applicable to MRS 3.x)/ ALM-12018 Memory Usage Exceeds the Threshold
Updated on 2024-04-11 GMT+08:00
View PDF

ALM-12018 Memory Usage Exceeds the Threshold

Description

The system checks the memory usage of the system every 30 seconds and compares the actual memory usage with the threshold. The memory usage has a default threshold, this alarm is generated when the value of the memory usage exceeds the threshold.

When the Trigger Count is 1, this alarm is cleared when the host memory usage is less than or equal to the threshold. When the Trigger Count is greater than 1, this alarm is cleared when the host memory usage is less than or equal to 90% of the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

12018

Major

Yes

Parameters

Name

Meaning

Source

Specifies the cluster or system for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Trigger Condition

Specifies the threshold triggering the alarm. If the current indicator value exceeds this threshold, the alarm is generated.

Impact on the System

Service processes respond slowly or become unavailable.

Possible Causes

Memory configuration cannot meet service requirements. The memory usage reaches the upper limit.

Procedure

Expand the system.

  1. In the alarm list on FusionInsight Manager, click in the row where the alarm is located to view the alarm host address in the alarm details.
  2. Log in to the host where the alarm is generated as user root.
  3. If the memory usage exceeds the threshold, perform memory capacity expansion.
  4. Run the command free -m | grep Mem\: | awk '{printf("%s,", $3 * 100 / $2)}' to check the system memory usage.
  5. Wait for 5 minutes, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 6.

Collect fault information.

  1. On the FusionInsight Manager in the active cluster, choose O&M > Log > Download.
  2. Select OmmServer from the Service and click OK.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact the O&M personnel and send the collected log information.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None