Reporting High-Precision Logs

Function

This API is used to report tenant logs from a host to LTS.

To obtain the access IP address, log in to the LTS console, choose Host Management in the navigation pane, and click Install ICAgent in the upper right corner. The access IP address is contained in the ICAgent installation command. The port number is 8102. You can check the Example Request to see how to add the access IP address and port number in a request.

Each log event will carry a nanosecond-level timestamp when it is reported. When you view logs on the LTS console, the log events are sorted by timestamp.

URI

POST /v2/{project_id}/lts/groups/{log_group_id}/streams/{log_stream_id}/tenant/contents/high-accuracy

**Table 1** URI parameters
Parameter	Mandatory	Type	Description
project_id	Yes	String	Project ID. For details about how to obtain the project ID, see . No default value. Value length: 32 characters
log_group_id	Yes	String	Log group ID. For details about how to obtain the project ID, see . No default value. Value length: 36 characters
log_stream_id	Yes	String	Log stream ID. For details about how to obtain the project ID, see . No default value. Value length: 36 characters The write rate at most should not exceed 100 MB/s for a single log stream. Otherwise, logs may be lost.

Request Parameters

**Table 2** Request header parameters
Parameter	Mandatory	Type	Description
X-Auth-Token	Yes	String	Indicates the user token obtained from IAM. No default value. Minimum length: 1000 characters Maximum length: 2000 characters
Content-Type	Yes	String	Set this parameter to application/json;charset=UTF-8. Default value: None Minimum length: 30 characters Maximum length: 30 characters
Content-Encoding	No	String	Log compression format. Enumerated values: GZIP SNAPPY gzip snappy

**Table 3** Request body parameters
Parameter	Mandatory	Type	Description
contents	Yes	Array of LogContents	Indicates a list of log events that carry reporting timestamps.
labels	Yes	Object	Custom labels.
tenant_project_id	No	String	Tenant ID.

**Table 4** LogContents
Parameter	Mandatory	Type	Description
log_time_ns	Yes	Long	Indicates the log collection time (UTC time in nanoseconds). NOTE: The interval between the log collection time and current time must be less than the log retention duration. Otherwise, reported logs will be cleared. For example, if the log retention duration is seven days, the log collection time must be within the last seven days.
log	Yes	String	Indicates the log content.

Response Parameters

When the status code is 200, the response parameters are as follows:

**Table 5** Response body parameters
Parameter	Type	Description
errorCode	String	Indicates the status code. Example value: SVCSTG.ALS.200.200
errorMessage	String	Indicates the response description. Example value: Report success.
result	String	Response result.

When the status code is 400, the response parameters are as follows:

**Table 6** Response body parameters
Parameter	Type	Description
errorCode	String	Indicates the error code. Example value: SVCSTG.ALS.200.201 SVCSTG.ALS.200.210
errorMessage	String	Indicates the error description. Example value: Request conditions must be json format. projectid xxx log's quota has full!!
result	String	Response result.

When the status code is 401, the response parameters are as follows:

**Table 7** Response body parameters
Parameter	Type	Description
errorCode	String	Indicates the error code. Example value: SVCSTG.ALS.403.105
errorMessage	String	Indicates the error description. Example value: Project id is invalid.
result	String	Response result.

When the status code is 500, the response parameters are as follows:

**Table 8** Response body parameters
Parameter	Type	Description
errorCode	String	Indicates the error code. Example value: LTS.200500
errorMessage	String	Indicates the error description. Example value: Internal error
result	String	Response result.

When the status code is 503, the response parameter is as follows:

**Table 9** Response body parameter
Parameter	Type	Description
result	String	The requested service is unavailable.

Example Request

POST https://{access_IP_address:8102}/v2/{project_id}/lts/groups/{log_group_id}/streams/{log_stream_id}/tenant/contents/high-accuracy

{
	"contents": [
		{
			"log_time_ns": "1586850540000000000",
			"log": "Fri Feb  15 15:48:04 UTC 2019"
		},
		{
			"log_time_ns": "1586850540000000001",
			"log": "Sat Apri 18 16:04:04 UTC 2019"
		}
	],
	"labels": {
		"user_tag": "string"
	}
}

Example Response

Example response with status code 200:

Logs are reported.

{
  "errorCode": "SVCSTG.ALS.200.200",
  "errorMessage": "Report success.",
  "result": null
}

Example response with status code 401:

The authentication information is incorrect or invalid.

{
  "errorCode" : "SVCSTG.ALS.403.105",
  "errorMessage" : "Project id is invalid.",
  "result": null
}

Status Code

Status Code	Description
200	The request has succeeded.
400	The request is invalid. Modify the request based on the description in error_msg before a retry.
401	The authentication information is incorrect or invalid.
500	An internal error occurred.
503	The requested service is unavailable.