Step 2: Create a Virtual Gateway

Scenarios

You can create a virtual gateway and associate it with the VPC that you need to access.

Procedure

1. Log in to the management console.
2. On the console homepage, click in the upper left corner and select the desired region and project.
3. Click to display Service List and choose Networking > Direct Connect.
4. In the navigation pane on the left, choose Direct Connect > Virtual Gateways.
5. Click Create Virtual Gateway.
6. Configure the parameters based on Table 1.
   Figure 1 Creating a virtual gateway
   

   Table 1 Parameters required for creating a virtual gateway

   Parameter	Example Value	Description
   Name	vgw-123	Specifies the virtual gateway name. The name can contain 1 to 64 characters.
   Enterprise Project	default	Specifies the enterprise project by which virtual gateways are centrally managed. Select an existing enterprise project.
   VPC	VPC-001	Specifies the VPC to be associated with the virtual gateway.
   Local Subnet	192.168.0.0/16	Specifies the CIDR blocks of the subnets in the VPC to be accessed using Direct Connect. You can add one or more CIDR blocks. If there are multiple CIDR blocks, separate every entry with a comma (,).
   BGP ASN	64512	Specifies the BGP ASN of the virtual gateway.
   Tag	example_key1 example_value1	Adds tags to help you identify your virtual gateway. You can change them after the virtual gateway is created.
   Description	-	Provides supplementary information about the virtual gateway.

7. Click OK.

   Ensure that the virtual gateway is in the Normal state.