Help Center/ MapReduce Service/ User Guide/ Alarm Reference (Applicable to MRS 3.x)/ ALM-13007 Available ZooKeeper Client Connections Are Insufficient
Updated on 2022-09-26 GMT+08:00
View PDF

ALM-13007 Available ZooKeeper Client Connections Are Insufficient

Description

The system periodically detects the number of active processes between the ZooKeeper client and the ZooKeeper server every 60 seconds. This alarm is generated when the number of connections exceeds the threshold.

Attribute

Alarm ID

Alarm Severity

Automatically Cleared

13007

Minor

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service name for which the alarm is generated.

RoleName

Specifies the role name for which the alarm is generated.

HostName

Specifies the host name for which the alarm is generated.

ClientIP

Specifies the client IP address.

ServerIP

Specifies the server IP address.

Trigger Condition

Specifies the cause of the alarm.

Impact on the System

A large number of connections to ZooKeeper caused the ZooKeeper to be fully connected and unable to provide normal services.

Possible Causes

A large number of client processes are connected to ZooKeeper. The thresholds are not appropriate.

Procedure

Check whether there are a large number of client processes connected to ZooKeeper.

  1. On FusionInsight Manager, choose O&M > Alarm > Alarms. On the displayed interface, click the drop-down button of Available ZooKeeper Client Connections Are Insufficient. Confirm the node IP address of the host for which the alarm is generated in the Location Information.
  2. Open the ZooKeeper service interface, click Resource to enter the Resource page, and check whether the number of connections of the client with the IP address specified by Number of Connections (By Client IP Address) is large.

    • If it is, go to 3.
    • If it is not, go to 4.

  3. Check whether connection leakage occurs on the client process.
  4. Click in the Number of Connections (by Client IP Address) to enter the Thresholds page, and click Modify under Operation. Increase the threshold by referring to the value of maxClientCnxns by choosing Cluster > Name of the desired cluster > Services > ZooKeeper > Configurations > All Configurations > quorumpeer.
  5. Check whether the alarm is cleared.

    • If it is, no further action is required.
    • If it is not, go to 6.

Collect fault information.

  1. On the FusionInsight Manager portal, choose O&M > Log > Download.
  2. Select ZooKeeper in the required cluster from the Service.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact the O&M personnel and send the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None