Help Center/ MapReduce Service/ User Guide/ Alarm Reference (Applicable to MRS 3.x)/ ALM-45479 Number of Tablets of the Tserver Process Exceeds the Threshold
Updated on 2024-05-07 GMT+08:00

ALM-45479 Number of Tablets of the Tserver Process Exceeds the Threshold

Alarm Description

The system checks the Kudu service status every 60 seconds. This alarm is generated when the number of tablets of the Tserver process exceeds the threshold.

This alarm is cleared when the number of tablets of the Tserver process becomes normal and the system considers that the Kudu service recovers.

Alarm Attributes

Alarm ID

Alarm Severity

Auto Cleared

45479

Minor

Yes

Alarm Parameters

Type

Parameter

Description

Location Information

Source

Specifies the cluster for which the alarm was generated.

ServiceName

Specifies the service for which the alarm was generated.

RoleName

Specifies the role for which the alarm was generated.

HostName

Specifies the host for which the alarm was generated.

Impact on the System

If the number of tablets exceeds the threshold, the query performance of the Kudu engine deteriorates.

Possible Causes

The Tserver usage is too high or the Tserver load is unbalanced.

Handling Procedure

Handle the Kudu instance exception.

  1. On FusionInsight Manager, choose O&M > Alarm > Alarms, and check whether alarm ALM-45479 Number of Tablets of the Tserver Process Exceeds the Threshold exists.

    • If yes, go to 2.
    • If no, go to 6.

  2. Choose O&M > Alarm > Thresholds > Kudu, locate the threshold of this alarm, compare the threshold with the monitored number of tablets in the Tserver process of the cluster, and handle the alarm accordingly.

    • If the threshold is not properly set, change the threshold and go to 5.
    • If the Tserver load is unbalanced, go to 3.
    • If the Tserver usage is too high, delete obsolete tables or add Tserver nodes, and go to 3.

  3. Log in to the Kudu node where the number of tablets exceeds the threshold.
  4. Run the following commands to balance the load of the cluster (during off-peak hours, recommended):

    su omm

    cd /opt/Bigdata/FusionInsight_Kudu_xxx/install/FusionInsight-Kudu-xxx/kudu/bin

    ./kudu cluster rebalance <master_addresses> [-tables=<tables>]

    The preceding parameters can be obtained from the KuduMaster web UI. The tables parameter is optional.

  5. Choose O&M > Alarm > Alarms and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 6.

Collect fault information.

  1. On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Log > Download.
  2. Expand the Service drop-down list, and select Kudu for the target cluster.
  3. Click the edit icon in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact O&M personnel and provide the collected logs.

Alarm Clearance

This alarm is automatically cleared after the fault is rectified.

Related Information

None