Help Center/ MapReduce Service/ User Guide/ Alarm Reference (Applicable to MRS 3.x)/ ALM-18022 Insufficient Yarn Queue Resources
Updated on 2022-11-10 GMT+08:00
View PDF

ALM-18022 Insufficient Yarn Queue Resources

Description

The alarm module checks Yarn queue resources every 60 seconds. This alarm is generated when available resources or ApplicationMaster (AM) resources of a queue are insufficient.

This alarm is cleared when available resources are sufficient.

Attribute

Alarm ID

Alarm Severity

Auto Clear

18022

Minor

Yes

Parameters

Parameter Name

Description

Source

Specifies the cluster for which the alarm is generated.

QueueName

Specifies the queue for which the alarm is generated.

QueueMetric

Specifies the metric of the queue for which the alarm is generated.

Trigger Condition

Specifies the threshold triggering the alarm. If the current indicator value exceeds this threshold, the alarm is generated.

Impact on the System

  • An application being executed takes longer time.
  • An application fails to be executed for a long time after being submitted.

Possible Causes

  • NodeManager node resources are insufficient.
  • The configured maximum resource capacity of the queue is excessively small.
  • The configured maximum AM resource percentage is excessively small.

Procedure

View alarm details.

  1. On the FusionInsight Manager, choose O&M > Alarm > Alarms.
  2. View location information of this alarm and check whether QueueName is root and QueueMetric is Memory or QueueName is root and QueueMetric is vCores.

    • If yes, go to 3.
    • If no, go to 4.

  1. The memory or CPU of the Yarn cluster is insufficient. In this case, log in to the node where NodeManager resides and run the free -g and cat /proc/cpuinfo commands to query the available memory and available CPU of the node, respectively. On FusionInsight Manager, increase the values of yarn.nodemanager.resource.memory-mb and yarn.nodemanager.resource.cpu-vcores for the Yarn NodeManager based on the query results. Then, restart the NodeManager instance. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 4.

  1. View location information of this alarm and check whether QueueName is <Tenant Queue> and QueueMetric is Memory, or QueueName is <Tenant Queue> and QueueMetric is vCores in Location, check whether available Memory = or available vCores = are included in Additional Information.

    • If yes, go to 5.
    • If no, go to 7.

  1. The memory or CPU of the tenant queue is insufficient. In this case, choose Tenant Resources > Dynamic Resource Plan > Resource Distribution Policy and increase the value of Maximum Capacity. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 6.

  1. Choose Cluster > Name of the desired cluster > Services > Yarn > Configurations > All Configurations. Enter the keyword "threshold" and click ResourceManager. Adjust the threshold values of the following parameters:

    If Additional Information contains available Memory =, change the value of yarn.queue.memory.alarm.threshold to a value smaller than that of available Memory = in Additional Information.

    If Additional Information contains available vCores =, change the value of yarn.queue.vcore.alarm.threshold to a value smaller than that of available vCores = in Additional Information.

    Wait for five minutes and check whether the alarm is cleared.
    • If yes, no further action is required.
    • If no, go to 9.

  2. If available AmMemory = or available AmvCores = is included in Additional Information, ApplicationMaster memory or CPU of the tenant queue is insufficient. In this case, choose Tenant Resources > Dynamic Resource Plan > Queue Configuration and increase the value of Maximum Am Resource Percent. Then, check whether this alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 8.

  3. Choose Cluster > Name of the desired cluster > Services > Yarn > Configurations > All Configurations. Enter the keyword "threshold" and click ResourceManager. Adjust the threshold values of the following parameters:

    If Additional Information contains available AmMemory =, change the value of yarn.queue.memory.alarm.threshold to a value smaller than that of available AmMemory = in Additional Information.

    If Additional Information contains available AmvCores =, change the value of yarn.queue.vcore.alarm.threshold to a value smaller than that of available AmvCores = in Additional Information.

    Wait for five minutes and check whether the alarm is cleared.
    • If yes, no further action is required.
    • If no, go to 9.

Collect fault information.

  1. Log in to FusionInsight Manager of the active cluster, and choose O&M > Log > Download.
  2. Select Yarn in the required cluster from the Service.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact the O&M personnel and send the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Reference

None