ALM-12034 Periodical Backup Failure
Description
The system executes the periodic backup task every 60 minutes. This alarm is generated when a periodical backup task fails to be executed. This alarm is cleared when the next backup task is executed successfully.
Attribute
Alarm ID |
Alarm Severity |
Auto Clear |
---|---|---|
12034 |
Major |
Yes |
Parameters
Name |
Meaning |
---|---|
Source |
Specifies the cluster or system for which the alarm is generated. |
ServiceName |
Specifies the service for which the alarm is generated. |
RoleName |
Specifies the role for which the alarm is generated. |
HostName |
Specifies the host for which the alarm is generated. |
TaskName |
Specifies the task. |
Impact on the System
There are not available backup packages for a long time, so the system cannot be restored in case of exceptions.
Possible Causes
The alarm cause depends on the task details. Handle the alarm according to the logs and alarm details.
Procedure
Check whether the disk space is sufficient.
- In the FusionInsight Manager portal, click O&M > Alarm > Alarms.
- In the alarm list, click in the row where the alarm is located and obtain TaskName from Location.
- Log in to the active node of the cluster as the root user and check whether information similar to the following is recorded in backup and restoration logs in /var/log/Bigdata/controller/backup/.
Upload backup files to *** file failed, error info: ***
- On FusionInsight Manager, choose O&M > Backup and Restoration > Backup Management. Locate the backup task based on TaskName, click Configure in the Operation column, and check whether all configuration items are correctly configured.
- Choose More > Back Up Now to start the backup task and check whether the backup task is successfully executed.
- After 2 minutes, check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 7.
- Choose More > View History in the Operation column. In the displayed dialog box view the task details.
Figure 1 View History
- In the displayed dialog box and click to check whether the following message is displayed: Failed to backup xx due to insufficient disk space, move the data in the xx directory to other directories.
- Choose Backup Path > View and obtain the Backup Path.
- Log in to the node as user root and run the following command to check the node mounting details:
df -h
- Check whether the available space of the node to which the backup path is mounted is less than 20 GB.
- Check whether there are many backup packages in the backup directory.
- Enable the available space of the node to which the backup directory is mounted to be greater than 20 GB by moving backup packages out of the backup directory or delete the backup packages.
- After the problem is resolved, perform the backup task again and check whether the backup task execution is successful.
- After 2 minutes, check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 16.
Collect fault information.
- On the FusionInsight Manager portal, choose O&M > Log > Download.
- Select Controller from the Service and click OK.
- Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
- Contact the O&M personnel and send the collected log information.
Alarm Clearing
After the fault is rectified, the system automatically clears this alarm.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.