Authorizing Access to Database Assets

Prerequisites

• DSC has been allowed to access the database assets. For details, see Allowing or Disallowing Access to Cloud Assets.
• You have applied for an ECS instance and installed a database on it.
• RDS, GaussDB(DWS), DDS, or GaussDB service has been enabled, you have assets on them, and there are available IP addresses in the corresponding subnets.
• The Status of the database instance is Normal, and the number of security groups is 1.

Constraints

Only data sources and versions supported by DSC can be added. For details, see Table 1.

Authorizing Access to a Database Assets

This section uses the RDS database as an example to describe how to authorize access to database assets. To authorize access to other types of database assets, click the corresponding database type.

1. Log in to the management console.
2. Click in the upper left corner and select a region or project.
3. In the navigation tree on the left, click . Choose Security & Compliance > Data Security Center .
4. In the navigation tree on the left, choose Asset Management > Asset Center. The Asset Center page is displayed.
5. Click RDS to go to the RDS database instance list page. If you need to authorize other types of databases, click the corresponding database type. The RDS database type is just used as an example.
   Figure 1 RDS DB instances
   

6. Click the Database Instances tab. The Database Instance tab page is displayed. Authorization can be performed in either of the following ways:
   • Method 1: Click Authorize in the Operation column of the database instance list, and enter the database information for authorization.
     • Grant the read-only permission: Only the sensitive data identification function can be used.
     • Grant the read and write permission: The sensitive data identification and data anonymization functions can be used.
     

     • After the RDS read-only permission is authorized, DSC creates an account dsc_readonly in RDS.
       • After the password of the dsc_readonly account is reset in RDS, it will not be automatically synchronized to DSC. As a result, the sensitive data identification task fails. Therefore, do not reset the password of this account.
       • If you have reset the password of dsc_readonly in RDS, delete the authorized RDS DB instance in DSC and re-authorize the instance.
     • DSC cannot scan and mask sensitive data in MySQL databases which SSL has been enabled for on the RDS DB instance.
     Figure 2 Authorizing access to databases
     
   • Method 2: Click an instance name to go to the instance details page. In the Operation column, click Authorize to authorize access to the database.
     Figure 3 Instance details
     

7. After the authorization is complete, click the Databases tab to view the connection status of the authorized database.
   After the asset authorization is complete, the Connection Status of the asset is Checking, which means DSC is checking the database connectivity.

   • DSC can access the added database normally if the Connection Status of the database is Succeeded.
   • DSC cannot access the added database normally if the Connection Status of the database is Failed. Move the cursor to Failed to view the failure cause or rectify the fault by referring to section How Do I Troubleshoot the Failure in Connecting to the Added Database?

Adding a Self-Built Database Instance

You can add and delete self-built database instances. For details about the database types and versions supported by DSC, see Table 1. This section describes how to add a self-built database. For details about how to delete a database, see Related Operations.

1. Log in to the management console.
2. Click in the upper left corner and select a region or project.
3. In the navigation tree on the left, click . Choose Security & Compliance > Data Security Center .
4. In the navigation tree on the left, choose Asset Management > Asset Center. The Asset Center page is displayed.
5. Choose Databases > Self-built Databases. The Database Instances tab page is displayed.
6. Click the Database Instances tab. The Database Instance tab page is displayed.
7. Click Add Instance in the upper left corner of the database instance list. The Add Database Instance dialog box is displayed.
   Figure 4 Adding a database instance
   

8. Set related parameters based on Table 2 and click OK to add the self-built database instance.

   Table 2 Configuring database instance information

   Parameter	Description
   ECS	Select the ECS of the self-built database instance from the drop-down list.
   Security group	Select a security group from the drop-down list.
   Database Engine	Select a DB engine from the drop-down list. Currently, the following DB engines are supported: MySQL TDSQL KingBase DMDBMS PostgreSQL SQLServer Oracle
   Version	Select a DB engine version from the drop-down list box.
   Database Server Address	Select a server address from the drop-down list box. If the database is deployed in the cluster mode and data masking is required, set this parameter to the IP address of the primary node.
   Database Port	Enter an integer ranging from 0 to 65535.
   Database Name	Enter a database name.
   Username/Password	Enter the username and password of the database.
   Asset	Enter 4 to 255 characters. Only letters, digits, hyphens (-), and "_" are allowed. The value must start with a letter.
   Creating a metadata drawing task	After this function is enabled, metadata tasks are automatically delivered based on the default database of the instance to obtain the database, table, and column information of the instance.

9. After the database instance is added, you can authorize access to the database instance. For details, see Authorizing Access to a Database Assets.

Adding a Self-Built External Database Instance

You can use to connect your on-premises assets to the proxy VPCs in the cloud, and subsequently add your on-premises databases to DSC.

1. Log in to the management console.
2. Click in the upper left corner and select a region or project.
3. In the navigation tree on the left, click . Choose Security & Compliance > Data Security Center .
4. In the navigation tree on the left, choose Asset Management > Asset Center. The Asset Center page is displayed.
5. Choose Databases > Self-built Databases. The Databases tab page is displayed.
6. Click the Database Instances tab. The Database Instance tab page is displayed.
7. Click Add External Database in the upper left corner. The Add Database Instance dialog box is displayed.
8. Set parameters based on Table 3 and click OK.

   Table 3 Configuring database instance information

   Parameter	Description
   Region	Region where the instance is deployed.
   Proxy VPC	Select a proxy VPC from the drop-down list..
   Subnet	Select a subnet from the drop-down list.
   Security group	Select a security group from the drop-down list.
   Database Engine	Select a DB engine from the drop-down list. Currently, the following DB engines are supported: MySQL TDSQL KingBase DMDBMS PostgreSQL SQLServer Oracle
   Version	Select a DB engine version from the drop-down list box.
   Database Server Address	Enter the IP address of the host where the asset is located.
   Database Port	Enter an integer ranging from 0 to 65535.
   Database Name	Enter a database name.
   User Name	Enter the database username.
   Password	Enter the database password.
   Asset	Enter 4 to 255 characters. Only letters, digits, hyphens (-), and "_" are allowed. The value must start with a letter.

9. After this function is enabled, metadata tasks are automatically delivered based on the default database of the instance to obtain the database, table, and column information of the instance.
10. After the database instance is added, you can authorize access to the database instance. For details, see Authorizing Access to a Database Assets.

Drawing Metadata of an Instance

• If the number of authorized databases of a cloud database instance is greater than 0, click Refresh in the Operation column of the instance list to obtain the database, table, and column information of the instance.

  Cloud databases that do not support metadata collection, such as DDS, are excluded. For details, see section Creating a Metadata Collection Task.

• If you enable the function of automatically creating a metadata task when adding a self-built database instance, the system automatically creates a metadata task to obtain all metadata of the instance after the instance is created.

  Self-built databases that do not support metadata collection, such as SQL Server, are excluded. For details, see section Creating a Metadata Collection Task.

• Manually create a metadata task by referring to section Creating a Metadata Collection Task.

Related Operations

• Deleting a DB instance

  A database instance can be deleted only when it is self-built and the number of authorized databases in the instance is 0.

  Select multiple self-built database instances and click Batch Delete in the upper left corner of the instance list to delete the instances. You can also click Delete in the Operation column of the instance list to delete a single DB instance.

• Creating an identification task

  On the Databases tab page, click Create Identification Task in the Operation column of the asset list to create an identification task for an asset. For details, see section Creating an Identification Task.