Updated on 2023-08-15 GMT+08:00

Installing the SDI Driver

Scenario

Currently, there are three types of SDI cards: SDI storage cards, SDI 2.2 (network cards), and SDI 3.0 (integrated storage and network cards). If the BMS uses SDI storage cards (neither SDI 2.2 nor SDI 3.0), the SDI driver needs to be installed on the VM so that EVS disks can be attached to the BMS. In other cases, skip this section. Currently, ARM 64 VMs do not support SDI cards. You do not need to install the SDI driver on such VMs.

Prerequisites

  • You have logged in to the VM.
  • You have downloaded the SDI driver (scsi_ep_front) as instructed in Software and have uploaded it to the VM.

    The scsi_ep_front version must be 1.0.13 or later.

Procedure

The following steps are for reference only.

  1. Go to the directory storing the SDI driver installation package and run the following command:

    rpm -ivh kmod-scsi_ep_front-centos_7.6_1.0.18-3.10.0_957.el7.centos.x86_64.rpm

    The Ubuntu and Debian SDI driver uses the .deb installation package. Run the dpkg -ixxx (xxx indicates the name of the SDI installation package) command to install the SDI driver.

  2. After the installation is complete, run the rpm -qa | grep scsi command. The installation is successful if information similar to the following is displayed:
    [root@localhost ~] rpm -qa | grep scsi
    lsscsi-0.27-6.el7.x86_64
    kmod-scsi_ep_front-centos_7.6_1.0.18-3.10.0_957.el7.centos.x86_64

    For Ubuntu 18.04, Ubuntu 16.04, Ubuntu 14.04, and Debian, run the dkms status command. If installed is displayed, the installation is successful. Run the update-initramfs -u command to update the driver in the kernel.

    ...
    root@ubuntu:~/file# dkms status
    scsi_ep_front, 1.0.13, 4.4.0-21-generic, x86_64: installed
    scsi_ep_front, 1.0.13, 4.4.0-59-generic, x86_64: built
    scsi_ep_front, 1.0.13, 4.4.0-96-generic, x86_64: installed
  3. Run the following commands to check whether the SDI driver matches the kernel version:
    1. Run the uname -r command to obtain the OS kernel version.
      [root@localhost r74]# uname -r
      3.10.0-957.el7.x86_64
    2. Run the find / -name "*front*.ko" command to check the SDI card driver matching the kernel version.
      [root@localhost r74]# find / -name "*front*.ko"
      /usr/lib/modules/3.10.0-957.el7.x86_64/extra/scsi_ep_front/scsi_ep_front.ko