From Other Cloud MongoDB to DDS

Diagram

Figure 1 Migrating MongoDB databases from other clouds

Figure 2 Migrating MongoDB databases from other cloud servers

Migration Process

Figure 3 Flowchart

Migration Suggestions (Important)

• Database migration is closely impacted by a wide range of environmental and operational factors. To ensure the migration goes smoothly, perform a test run before the actual migration to help you detect and resolve any potential issues in advance. Recommendations on how to minimize any potential impacts on your data base are provided in this section.
• It is strongly recommended that you start your migration task during off-peak hours. A less active database is easier to migrate successfully. If the data is fairly static, there is less likely to be any severe performance impacts during the migration.

Notes on Migration (Important)

Before creating a migration task, read the migration notes carefully.

For details, see precautions on using specific migration tasks in Data Replication Service Real-Time Migration.

Preparations

1. Permissions
   Table 1 lists the permissions required for the source and destination databases when migrating a MongoDB database from another cloud to DDS on the current cloud.

   Table 1 Migration permissions

   Database	Full Migration Permission	Full+Incremental Migration Permission
   Source	Replica set: The source database user must have the read permission for the database to be migrated. Single node: The source database user must have the read permission for the database to be migrated. Cluster: The source database user must have the read permission for the databases to be migrated and the config database. To migrate accounts and roles of the source database, the source database user must have the read permission for the system.users and system.roles system tables of the admin database.	Replica set: The source database user must have the read permission for the databases to be migrated and the local database. Single node: The source database user must have the read permission for the databases to be migrated and the local database. Cluster: The source mongos node user must have the readAnyDatabase permission for the databases to be migrated and the config database. The source shard node user must have the readAnyDatabase permission for the admin database and the read permission for the local database. To migrate accounts and roles of the source database, the source database user must have the read permission for the system.users and system.roles system tables of the admin database.
   Destination	The destination database user must have the dbAdminAnyDatabase permission for the admin database and the readWrite permission for the destination database. If the destination database is a cluster instance, the migration account must have the read permission for the config database.

   • Source database permissions:

     The source MongoDB database user must have all the required permissions listed in Table 1. If the permissions are insufficient, create a user that has all of the permissions on the source database.

     Data of the following third-party cloud vendors can be migrated: Alibaba Cloud and Tencent Cloud (Tencent Cloud 3.2 is not supported).

     For example, if you want to migrate an Alibaba Cloud MongoDB database to a DDS database, you can use the initial account of the source database.

   • Destination database permissions:

     If the destination database is a DDS database, the initial account can be used.

2. Network settings
   Enable public accessibility for the source database.

   • Source database network settings:

     Any source database MongoDB instances will need to be accessible from the Internet.

   • Destination database network settings: No settings are required.
3. Security rules
   • Source database security group settings:

     The replication instance needs to be able to access the source MongoDB instance. That means that the EIP of the replication instance must be on the whitelist of the source MongoDB instance.

     Before configuring the network whitelist, you need to obtain the EIP of the replication instance.

     • After creating a replication instance on the DRS console, you can find the EIP on the Configure Source and Destination Databases page as shown in Figure 4.
       Figure 4 EIP of the replication instance
       

     You can also add 0.0.0.0/0 to the source database whitelist to allow any IP address to access the source database but this action may result in security risks.

     If you do take this step, then once the migration is complete, you should delete this item from the whitelist or your system will insecure.

   • Destination database security group settings:

     By default, the destination database and the DRS replication instance are in the same VPC and can communicate with each other. No further configuration is required.

4. Other

   You need to export the user information of the MongoDB database first and manually add it to the destination DDS DB instance because the user information will not be migrated.

Migration Procedure

1. Create a migration task.
   1. Log in to the management console and choose Databases > Data Replication Service to go to the DRS console.
   2. On the Online Migration Management page, click Create Migration Task.
   3. On the Replication Instance Information page, configure the task details, description, and replication instance details and click Next.
      Figure 5 Replication instance information
      

      Table 2 Task settings

      Parameter	Description
      Region	The region where your service is running. You can change the region.
      Task Name	The task name consists of 4 to 50 characters, starts with a letter, and can contain only letters (case-insensitive), digits, hyphens (-), and underscores (_).
      Description	The description consists of a maximum of 256 characters and cannot contain the following special characters: =<>&'\"

      Table 3 Replication instance settings

      Parameter	Description
      Data Flow	To the cloud
      Source DB Engine	Select MongoDB.
      Destination DB Engine	Select DDS.
      Network Type	Select Public network.
      Destination DB Instance	The DDS DB instance you purchased.
      Replication Instance Subnet	The subnet where the replication instance resides. You can also click View Subnet to go to the network console to view the subnet where the instance resides. By default, the DRS instance and the destination DB instance are in the same subnet. You need to select the subnet where the DRS instance resides, and there are available IP addresses for the subnet. To ensure that the replication instance is successfully created, only subnets with DHCP enabled are displayed.
      Migration Type	Full This migration type is suitable for scenarios where service interruption is acceptable. All objects in non-system databases are migrated to the destination database at one time. The objects include collections and indexes. Full+Incremental The full+incremental migration type allows you to migrate data without interrupting services. After a full migration initializes the destination database, an incremental migration parses logs to ensure data consistency between the source and destination databases.
      Source DB Instance Type	If you select Full+Incremental for Migration Type, set this parameter based on the source database. If the source database is a cluster instance, set this parameter to Cluster. If the source database is a replica set or a single node instance, set this parameter to Non-cluster.
      Obtain Incremental Data	This parameter is available for configuration if Source DB Instance Type is set to Cluster. You can determine how to capture data changes during the incremental synchronization. oplog: For MongoDB 3.2 or later, DRS directly connects to each shard of the source DB instance to extract data. If you select this mode, you must disable the balancer of the source instance. When testing the connection, you need to enter the connection information of each shard node of the source instance. changeStream: This method is recommended. For MongoDB 4.0 and later, DRS connects to mongos nodes of the source instance to extract data. If you select this method, you must enable the WiredTiger storage engine of the source instance. NOTE: Only whitelisted users can use changeStream. To use this function, submit a service ticket. In the upper right corner of the management console, choose Service Tickets > Create Service Ticket to submit a service ticket.
      Source Shard Quantity	If Source DB Instance Type is set to Cluster and Obtain Incremental Data is set to oplog, enter the number of source shard nodes. The default minimum number of source DB instances is 2 and the maximum number is 32. You can set this parameter based on the number of source database shards.
      Tags	This setting is optional. Adding tags helps you better identify and manage your tasks. Each task can have up to 10 tags.

   4. On the Configure Source and Destination Databases page, wait until the replication instance is created. Then, specify source and destination database information and click Test Connection for both the source and destination databases to check whether they have been connected to the replication instance. After the connection tests are successful, select the check box before the agreement and click Next.
      Figure 6 Source database information
      

      Table 4 Source database settings

      Parameter	Description
      mongos Address	IP address or domain name of the source database in the IP address/Domain name:Port format. The port of the source database. Range: 1 - 65534 You can enter a maximum of three groups of IP addresses or domain names of the source database. Separate multiple values with commas (,). For example: 192.168.0.1:8080,192.168.0.2:8080. Ensure that the entered IP addresses or domain names belong to the same sharded cluster. NOTE: If multiple IP addresses or domain names are entered, the test connection is successful as long as one IP address or domain name is accessible. Therefore, you must ensure that the IP address or domain name is correct.
      Authentication Database	The name of the authentication database. For example: The default authentication database of DDS instance is admin.
      mongos Username	A username for the source database.
      mongos Password	The password for the source database username.
      SSL Connection	SSL encrypts the connections between the source and destination databases. If SSL is enabled, upload the SSL CA root certificate.
      Sharded Database	Enter the information about the sharded databases in the source database.

      • Destination database configuration
        Figure 7 Destination database information
        

        Table 5 Destination database settings

        Parameter	Description
        DB Instance Name	The DB instance you selected when creating the migration task and cannot be changed.
        Database Username	The username for accessing the destination database.
        Database Password	The password for the database username.

   5. On the Set Task page, select migration objects and click Next.
      Figure 8 Migration object
      

      Table 6 Migration object

      Parameter	Description
      Migrate Account	There are accounts that can be migrated completely and accounts that cannot be migrated. You can choose whether to migrate the accounts. Accounts that cannot be migrated or accounts that are not selected will not exist in the destination database. Ensure that your services will not be affected by these accounts. Yes If you choose to migrate accounts, see Migrating Accounts in Data Replication Service User Guide to migrate database users and roles. No During the migration, accounts and roles are not migrated.
      Migrate Object	You can choose to migrate all objects, tables, or databases based on your service requirements. All: All objects in the source database are migrated to the destination database. After the migration, the object names will remain the same as those in the source database and cannot be modified. Tables: The selected table-level objects will be migrated. Databases: The selected database-level objects will be migrated. If the source database is changed, click in the upper right corner before selecting migration objects to ensure that the objects to be selected are from the changed source database. NOTE: If you choose not to migrate all of the databases, the migration may fail because the objects, such as stored procedures and views, in the database to be migrated may have dependencies on other objects that are not migrated. To ensure a successful migration, you are advised to migrate all of the databases. When you select an object, the spaces before and after the object name are not displayed. If there are two or more consecutive spaces in the middle of the object name, only one space is displayed. The search function can help you quickly select the required database objects.

   6. On the Check Task page, check the migration task.
      • If any check fails, review the cause and rectify the fault. After the fault is rectified, click Check Again.

        For details about how to handle check failures, see Checking Whether the Source Database Is Connected in Data Replication Service User Guide.

      • If all check items are successful, click Next.
        Figure 9 Task Check
        
      

      You can proceed to the next step only when all check items are successful. If any alarms are generated, view and confirm the alarm details first before proceeding to the next step.

   7. On the displayed page, specify Start Time, Send Notification, SMN Topic, Synchronization Delay Threshold, and Stop Abnormal Tasks After and confirm that the configured information is correct and click Submit to submit the task.
      Figure 10 Task startup settings
      

      Table 7 Task startup settings

      Parameter	Description
      Start Time	Set Start Time to Start upon task creation or Start at a specified time based on site requirements. The Start at a specified time option is recommended. NOTE: The migration task may affect the performance of the source and destination databases. You are advised to start the task in off-peak hours and reserve two to three days for data verification.
      Send Notifications	SMN topic. This parameter is optional. If an exception occurs during migration, the system will send a notification to the specified recipients.
      SMN Topic	This parameter is available only after you enable Send Notification and create a topic on the SMN console and add a subscriber. For details, see Simple Message Notification User Guide.
      Synchronization Delay Threshold	During an incremental migration, a synchronization delay indicates a time difference (in seconds) of synchronization between the source and destination database. If the synchronization delay exceeds the threshold you specify, DRS will send alarms to the specified recipients. The value ranges from 0 to 3,600. To avoid repeated alarms caused by the fluctuation of delay, an alarm is sent only after the delay has exceeded the threshold for six minutes. NOTE: In the early stages of an incremental migration, there is more delay because more data is waiting to be synchronized. In this situation, no notifications will be sent. Before setting the delay threshold, enable Send Notification. If the delay threshold is set to 0, no notifications will be sent to the recipient.
      Stop Abnormal Tasks After	Number of days after which an abnormal task is automatically stopped. The value must range from 14 to 100. The default value is 14. NOTE: Tasks in the abnormal state are still charged. If tasks remain in the abnormal state for a long time, they cannot be resumed. Abnormal tasks run longer than the period you set (unit: day) will automatically stop to avoid unnecessary fees.

   8. After the task is submitted, go back to the Online Migration Management page to view the task status.

2. Manage the migration task.
   The migration task contains two phases: full migration and incremental migration. You can manage them in different phases.

   • Full migration
     • Viewing the migration progress: Click the target full migration task, and on the Migration Progress tab, you can see the migration progress of the structure, data, indexes, and migration objects. When the progress reaches 100%, the migration is complete.
     • Viewing migration details: In the migration details, you can view the migration progress of a specific object. If the number of objects is the same as that of migrated objects, the migration is complete. You can view the migration progress of each object in detail. Currently, this function is available only to whitelisted users. You can submit a service ticket to apply for this function.
   • Incremental Migration Permission
     • Viewing the synchronization delay: After the full migration is complete, an incremental migration starts. On the Online Migration Management page, click the target migration task. On the displayed page, click Migration Progress to view the synchronization delay of the incremental migration. If the synchronization delay is 0s, the destination database is being synchronized with the source database in real time. You can also view the data consistency on the Migration Comparison tab.
       Figure 11 Viewing the synchronization delay
       
     • Viewing the migration results: On the Online Migration Management page, click the target migration task. On the displayed page, click Migration Comparison and perform a migration comparison in accordance with the comparison process, which should help you determine an appropriate time for migration to minimize service downtime.
       Figure 12 Database comparison process
       

       For details, see Comparing Migration Items in Data Replication Service User Guide.

3. Cut over services.

   You are advised to start the cutover process during off-peak hours. At least one complete data comparison is performed during off-peak hours. To obtain accurate comparison results, start data comparison at a specified time point during off-peak hours. If it is needed, select Start at a specified time for Comparison Time. Due to slight time difference and continuous operations on data, inconsistent comparison results may be generated, reducing the reliability and validity of the results.

   1. Interrupt services first. If the workload is not heavy, you may not need to interrupt the services.
   2. Run the following statement on the source database and check whether any new sessions execute SQL statements within the next 1 to 5 minutes. If there are no new statements executed, the service has been stopped.

      db.currentOp()

      

      The process list queried by the preceding statement includes the connection of the DRS replication instance. If no additional session executes SQL statements, the service has been stopped.

   3. On the Migration Progress page, view the synchronization delay. When the delay is displayed as 0s and remains stable for a period, then you can perform a data-level comparison between the source and destination databases. For details about the time required, refer to the results of the previous comparison.
      • If there is enough time, compare all objects.
      • If there is not enough time, use the data-level comparison to compare the tables that are frequently used and that contain key business data or inconsistent data.
   4. Determine an appropriate time to cut the services over to the destination database. After services are restored and available, the migration is complete.

4. Stop or delete the migration task.
   1. Stopping the migration task. After databases and services are migrated to the destination database, to prevent operations on the source database from being synchronized to the destination database to overwrite data, you can stop the migration task. This operation only deletes the replication instance, and the migration task is still displayed in the task list. You can view or delete the task. After the task is stopped, DRS will not charge you anymore.
   2. Delete the migration task. After the migration task is complete, you can delete it. After the migration task is deleted, it will no longer be displayed in the task list.