Creating a Route Table

Function

This API is used to create a route table.

Notes and Constraints

The destination CIDR block of a custom route table cannot be included in the CIDR blocks of the local route.
Each destination CIDR block of a route in the same route table must be unique.
No more than five routes can be created at a time.

URI

POST /v1/{project_id}/routetables

Table 1 describes the parameters.

**Table 1** Parameter description
Parameter	Mandatory	Type	Description
project_id	Yes	String	Specifies the project ID. For details about how to obtain a project ID, see Obtaining a Project ID.

Request Parameters

**Table 2** Request parameter
Parameter	Mandatory	Type	Description
routetable	Yes	routetable object	Specifies the route table. For details, see Table 3.

**Table 3** Description of the **routetable** field
Parameter	Mandatory	Type	Description
name	No	String	Specifies the route table name. The value can contain up to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
routes	No	Array of route objects	Specifies the route list. For details, see Table 4. Each route table can have a maximum of 200 routes.
vpc_id	Yes	String	Specifies the ID of the VPC associated with the route table.
description	No	String	Provides supplementary information about the route table. The value can contain no more than 255 characters and cannot contain angle brackets (< or >).

**Table 4** Description of the **route** field
Parameter	Mandatory	Type	Description
type	Yes	String	Specifies the route type. Values: ecs (ECS) eni (NIC) vip (Virtual IP address) nat (NAT gateway) peering (VPC peering connection) vpn (VPN) dc (Direct Connect connection) cc (Cloud Connect connection) egw: VPC endpoint. er: enterprise router subeni: supplementary network interface. local: reserved CIDR block. The destination CIDR block of the route configured cannot overlap with that defined by local.
destination	Yes	String	Specifies the destination CIDR block of a route. Constraints: The value must be in valid IPv4 or IPv6 CIDR formats.
nexthop	Yes	String	Specifies the ID of the next hop in the route. Values: When type is ecs, the value is an ECS ID. When type is eni, the value is an extension NIC ID. When type is vip, the value is a virtual IP address. When type is nat, the value a NAT gateway ID. When type is peering, the value is a VPC peering connection ID. When type is vpn, the value is a VPN ID. When type is dc, the value is a Direct Connect connection ID. When type is cc, the value is a Cloud Connect connection ID. When type is set to egw, the value is a VPC endpoint ID. When type is set to er, the value is the ID of an enterprise router. When type is set to subeni, the value is the ID of a supplementary network interface.
description	No	String	Provides supplementary information about the route. The value can contain up to 255 characters and cannot contain angle brackets (< or >).

Example Request

Create a route table named routetable-1234 for the VPC whose ID is 60c809cb-6731-45d0-ace8-3bf5626421a9 and create a route with next hop type of ECS.

POST https://{Endpoint}/v1/6fbe9263116a4b68818cf1edce16bc4f/routetables

{  
    "routetable": {  
        "name": "routetable-1234",
        "vpc_id": "60c809cb-6731-45d0-ace8-3bf5626421a9", 
        "routes":[
          {
            "type": "ecs", 
            "destination": "10.10.10.0/24",
            "nexthop":"7c50463d-d36c-4417-aa85-cc11fa10f341"
          }
       ],
        "description":"abc"
    } 
}

Response Parameters

**Table 5** Response parameter
Parameter	Type	Description
routetable	routetable object	Specifies the route table. For details, see Table 6.

**Table 6** Description of the **routetable** field
Parameter	Type	Description
id	String	Specifies the route table ID that uniquely identifies the route table. The value must be in standard UUID format.
name	String	Specifies the route table name. The value can contain up to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
default	Boolean	Specifies whether the route table is the default one. The value can be true (default route table) or false (custom route table).
routes	Array of route objects	Specifies the route list. For details, see Table 4. Each route table can have a maximum of 200 routes.
subnets	Array of subnet objects	Specifies the subnets associated with the route table. For details, see Table 5. Only subnets in the VPC to which the route table belongs can be associated with the route table.
tenant_id	String	Specifies the project ID.
vpc_id	String	Specifies the ID of the VPC associated with the route table.
description	String	Provides supplementary information about the route table. The value can contain up to 255 characters and cannot contain angle brackets (< or >).
created_at	String	Specifies the time (UTC) when the route table is created. Format: yyyy-MM-ddTHH:mm:ss
updated_at	String	Specifies the time (UTC) when the route table is updated. Format: yyyy-MM-ddTHH:mm:ss

**Table 7** Description of the **route** field
Parameter	Type	Description
type	String	Specifies the route type. Values: ecs (ECS) eni (NIC) vip (Virtual IP address) nat (NAT gateway) peering (VPC peering connection) vpn (VPN) dc (Direct Connect connection) cc (Cloud Connect connection) egw: VPC endpoint. er: enterprise router subeni: supplementary network interface. local: reserved CIDR block. The destination CIDR block of the route configured cannot overlap with that defined by local.
destination	String	Specifies the destination CIDR block of a route. Constraints: The value must be in valid IPv4 or IPv6 CIDR formats.
nexthop	String	Specifies the ID of the next hop in the route. Values: When type is ecs, the value is an ECS ID. When type is eni, the value is an extension NIC ID. When type is vip, the value is a virtual IP address. When type is nat, the value a NAT gateway ID. When type is peering, the value is a VPC peering connection ID. When type is vpn, the value is a VPN ID. When type is dc, the value is a Direct Connect connection ID. When type is cc, the value is a Cloud Connect connection ID. When type is set to egw, the value is a VPC endpoint ID. When type is set to er, the value is the ID of an enterprise router. When type is set to subeni, the value is the ID of a supplementary network interface.
description	String	Provides supplementary information about the route. The value can contain up to 255 characters and cannot contain angle brackets (< or >).

**Table 8** Description of the **subnet** field
Parameter	Type	Description
id	String	Specifies the ID of the subnet associated with the route table.

Example Response

{
    "routetable": {
        "id": "3d42a0d4-a980-4613-ae76-a2cddecff054",
        "vpc_id": "ab78be2d-782f-42a5-aa72-35879f6890ff",
        "description": "abc",
        "routes": [
            {
                "type": "ecs",
                "destination": "10.10.10.0/24",
                "nexthop": "7c50463d-d36c-4417-aa85-cc11fa10f341",
                "description": "abc"
            }
        ],
        "subnets": [
            {
                "id": "8d4ce32f-d68a-4c4c-9f18-c68d8a5c7f2f"
            }
        ],
        "tenant_id": "6fbe9263116a4b68818cf1edce16bc4f"
    }
}