Updating a Health Check

Function

This API is used to update a health check.

Constraints

The health check can be updated only when the provisioning status of the associated load balancer is ACTIVE.

Calling Method

For details, see Calling APIs.

URI

PUT /v3/{project_id}/elb/healthmonitors/{healthmonitor_id}

**Table 1** Path Parameters
Parameter	Mandatory	Type	Description
healthmonitor_id	Yes	String	Specifies the health check ID.
project_id	Yes	String	Definition: Specifies the project ID. For details about how to obtain a project ID, see Obtaining a Project ID. Constraints: N/A Range: The value can contain a maximum of 32 characters, including digits and lowercase letters. Default value: N/A

Request Parameters

**Table 2** Request header parameters
Parameter	Mandatory	Type	Description
X-Auth-Token	Yes	String	Definition: Specifies the token used for IAM authentication. Constraints: N/A Range: N/A Default value: N/A

**Table 3** Request body parameters
Parameter	Mandatory	Type	Description
healthmonitor	Yes	UpdateHealthMonitorOption object	Specifies the health check.

**Table 4** UpdateHealthMonitorOption
Parameter	Mandatory	Type	Description
admin_state_up	No	Boolean	Definition: Specifies the administrative status of the health check. Range: true: The health check function is enabled. false: The health check function is disabled.
delay	No	Integer	Specifies the interval between health checks, in seconds. The value ranges from 1 to 50.
domain_name	No	String	Specifies the domain name that HTTP requests are sent to during the health check. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. The value cannot be left blank, but can be specified as null or cannot be passed, indicating that the virtual IP address of the load balancer is used as the destination address of HTTP requests. This parameter is available only when type is set to HTTP or HTTPS.
expected_codes	No	String	Specifies the expected HTTP status code. This parameter will take effect only when type is set to HTTP, HTTPS, or GRPC. The value options are as follows: A specific value, for example, 200 A list of values that are separated with commas (,), for example, 200, 202 A value range, for example, 200-204
http_method	No	String	Specifies the HTTP method. The value can be GET, HEAD, or POST. The default value is GET. This parameter is available when type is set to HTTP or HTTPS.
max_retries	No	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. Range: 1 to 10
max_retries_down	No	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. Range: 1 to 10
monitor_port	No	Integer	Definition: Specifies the health check port. Constraints: If the backend server group protocol is IP, monitor_port cannot be 0. Range: 1 to 65535, or null (the port of a backend server will be used by default).
name	No	String	Specifies the health check name.
timeout	No	Integer	Specifies the maximum time required for waiting for a response from the health check, in seconds. It is recommended that you set the value less than that of parameter delay.
url_path	No	String	Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. The value can contain letters, digits, hyphens (-), slashes (/), periods (.), percentage signs (%), question marks (?), pound signs (#), ampersand signs (&), and the extended character set: _;~!()[]@$^:',+. Note: This parameter is available only when type* is set to HTTP or HTTPS.
type	No	String	Specifies the health check protocol. The value can be TCP, UDP_CONNECT, HTTP, HTTPS, GRPC, or TLS. Note: If the protocol of the backend server is QUIC, the value can only be UDP_CONNECT. If the protocol of the backend server is UDP, the value can only be UDP_CONNECT. If the protocol of the backend server is TCP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server is IP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server is HTTP, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is HTTPS, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is GRPC, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is TLS, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. QUIC protocol is not supported.

Response Parameters

Status code: 200

**Table 5** Response body parameters
Parameter	Type	Description
request_id	String	Definition: Specifies the request ID. Range: The value is automatically generated, and can contain characters including digits, lowercase letters, and hyphens (-).
healthmonitor	HealthMonitor object	Specifies the health check.

**Table 6** HealthMonitor
Parameter	Type	Description
admin_state_up	Boolean	Specifies the administrative status of the health check. Range: true: The health check function is enabled. false: The health check function is disabled. Default value: true
delay	Integer	Specifies the interval between health checks, in seconds. The value ranges from 1 to 50.
domain_name	String	Specifies the domain name that HTTP requests are sent to during the health check. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. The value is left blank by default, indicating that the virtual IP address of the load balancer is used as the destination address of HTTP requests. This parameter is available only when type is set to HTTP or HTTPS.
expected_codes	String	Specifies the expected HTTP status code. Value options: A specific value, for example, 200 A list of values that are separated with commas (,), for example, 200, 202 A value range, for example, 200-204 If type is set to GRPC, the default value is 0. If type is set to other protocols, the default value is 200. This parameter will take effect only when type is set to HTTP, HTTPS or GRPC.
http_method	String	Specifies the HTTP method. The value can be GET, HEAD, or POST. The default value is GET. This parameter is available when type is set to HTTP or HTTPS.
id	String	Specifies the health check ID.
max_retries	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. Range: 1 to 10
max_retries_down	Integer	Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. Range: 1 to 10. The default value is 3.
monitor_port	Integer	Definition: Specifies the health check port. Constraints: If the backend server group protocol is IP, monitor_port cannot be 0. Range: 1 to 65535, or null (the port of a backend server will be used by default). Default value: null
name	String	Specifies the health check name.
pools	Array of PoolRef objects	Specifies the IDs of the backend server groups for which the health check is configured. Only one ID will be returned.
project_id	String	Specifies the project ID.
timeout	Integer	Specifies the maximum time required for waiting for a response from the health check, in seconds. It is recommended that you set the value less than that of parameter delay.
type	String	Specifies the health check protocol. The value can be TCP, UDP_CONNECT, HTTP, HTTPS, GRPC, or TLS. Note: If the protocol of the backend server is QUIC, the value can only be UDP_CONNECT. If the protocol of the backend server is UDP, the value can only be UDP_CONNECT. If the protocol of the backend server is TCP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server is IP, the value can only be TCP, HTTP, or HTTPS. If the protocol of the backend server is HTTP, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is HTTPS, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is GRPC, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. If the protocol of the backend server is TLS, the value can only be TCP, HTTP, HTTPS, GRPC, or TLS. QUIC protocol is not supported.
url_path	String	Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. The value can contain letters, digits, hyphens (-), slashes (/), periods (.), percentage signs (%), question marks (?), pound signs (#), ampersand signs (&), and the extended character set: _;~!()[]@$^:',+. This parameter is available only when type* is set to HTTP or HTTPS.
created_at	String	Specifies the time when the health check was configured. The format is yyyy-MM-dd'T'HH:mm:ss'Z' (UTC time).
updated_at	String	Specifies the time when the health check was updated. The format is yyyy-MM-dd'T'HH:mm:ss'Z' (UTC time).

**Table 7** PoolRef
Parameter	Type	Description
id	String	Definition: Specifies the backend server group ID. Range: N/A

Example Requests

Modifying the interval between health checks

PUT https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/healthmonitors/c2b210b2-60c4-449d-91e2-9e9ea1dd7441

{
  "healthmonitor" : {
    "name" : "My Healthmonitor update",
    "max_retries" : 10,
    "delay" : 10
  }
}

Example Responses

Status code: 200

Successful request.

{
  "request_id" : "08d6ffea-d092-4cfa-860a-e364f3bef1be",
  "healthmonitor" : {
    "monitor_port" : null,
    "id" : "c2b210b2-60c4-449d-91e2-9e9ea1dd7441",
    "project_id" : "99a3fff0d03c428eac3678da6a7d0f24",
    "domain_name" : null,
    "name" : "My Healthmonitor update",
    "delay" : 10,
    "max_retries" : 10,
    "pools" : [ {
      "id" : "488acc50-6bcf-423d-8f0a-0f4184f5b8a0"
    } ],
    "admin_state_up" : true,
    "timeout" : 30,
    "type" : "HTTP",
    "expected_codes" : "200",
    "url_path" : "/",
    "http_method" : "GET"
  }
}