Updated on 2023-04-21 GMT+08:00

Error Codes

Description

This section provides the meanings of error codes returned by AS APIs.

Example of Returned Error Information

{"error":{"code":"AS.0001","message":"System error."}}

Error Code Description

If an error code starting with APIGW is returned after you call an API, rectify the fault by referring to the instructions provided in API Gateway Error Codes.

HTTP Status Code

Error Code

Error Message

Description

Solution

500

AS.0001

System error.

System error.

Try again later or contact technical support.

400

AS.0002

Request body is null.

The message body is empty.

Enter a valid message body.

401

AS.0005

The token of the header in the request is null.

The header in the request carries no or an empty token.

Enter a valid token.

401

AS.0006

The token of the header in the request is incorrect.

The header in the request carries an incorrect, invalid, or expired token.

Enter a valid token.

404

AS.0007

The requested resource [%s] could not be found.

The requested resources are not found.

Use the correct URL parameter.

400

AS.0008

Incorrect ProjectID.

The project id value carried in the URL is different from that resolved from the token.

Check whether the parameter in the URL matches that in the token.

403

AS.0011

You do not have the rights to perform the operation.

You do not have the rights to perform the operation.

Check whether te_admin, as_adm, or other required roles exist.

403

AS.0012

The user role is suspended.

Your rights to perform the operation have been frozen.

Check whether your user roles include op_suspended, the frozen one.

403

AS.0013

Your rights to perform the operation are disabled.

Your rights to perform the operation are disabled.

Check whether your user roles include op_restricted, the restricted one.

400

AS.0022

Request body error

The request is invalid.

Check whether the request body is in standard JSON format or whether an unsupported parameter exists.

400

AS.0026

Scaling action is not allowed in the cooling duration.

No scaling action is allowed in the cooldown period.

Try again later.

400

AS.0031

Policy does not allow [%s] to be performed.

Fine-grained authentication failed because no authentication item is specified.

Add the required authorization item.

400

AS.0033

The api version is illegal, only v1 and v2.

Invalid API ID.

Enter a correct API ID.

400

AS.0034

Failed to execute the policy because the AS group is in active state.

Failed to trigger the AS policy because a scaling action in the AS group is in progress.

An AS policy can be automatically triggered only when there is no in-progress scaling action in the AS group. Try again later.

400

AS.1001

The value of parameter Start number is invalid.

The start number value is invalid.

Enter a valid start number value.

400

AS.1002

The value of parameter Limit is invalid.

The limit value is invalid.

Enter a valid limit value.

400

AS.1003

The AS configuration ID is null.

The AS configuration ID is empty.

Add an AS configuration ID.

400

AS.1004

The AS configuration does not exist.

The AS configuration does not exist.

Use a correct AS configuration ID.

400

AS.1006

The AS configuration is in use.

The AS configuration is being used by an AS group and cannot be deleted.

Change this AS configuration for the AS group to another one and delete the AS configuration.

400

AS.1007

The AS configuration name is null.

The AS configuration name is empty.

Add an AS configuration name.

400

AS.1008

The AS configuration name is too long.

The AS configuration name is too long.

Use an AS configuration name of proper length.

400

AS.1009

The AS group ID is null.

The AS group ID is not specified.

Add an AS group ID.

400

AS.1011

The instance configuration information is null.

The instance_config field is not specified.

Enter a valid instance_config value.

400

AS.1014

The image ID in the AS configuration is null.

The image ID is not specified.

Add an image ID.

400

AS.1015

The image in the AS configuration does not exist.

The image in the AS configuration does not exist.

Use a correct image ID.

400

AS.1016

The specification ID in the AS configuration cannot be null.

The flavor ID is not specified.

Add a flavor ID.

400

AS.1017

The specification [%s] in the AS configuration does not exist.

The flavor of the AS configuration does not exist.

Use a correct flavor ID.

400

AS.1018

The specification [%s] and image is not match.

The flavor and image do not match.

Check whether the flavor matches the image. If not, modify the configuration.

400

AS.1019

The disk of this type is not applicable to the ECS.

The flavor and disk do not match.

Check whether the flavor matches the disk type. If not, change the resources.

400

AS.1021

The image in the AS configuration is not activated.

The image in the AS configuration is not activated.

Use a correct image ID.

400

AS.1022

The image in the AS configuration is not available.

The image in the AS configuration is unavailable.

Use a correct image ID.

400

AS.1023

Invalid AS configuration name.

The AS configuration name is invalid.

Use a valid AS configuration name.

400

AS.1024

The number of AS configurations exceeds the upper limit.

The number of AS configurations exceeds the upper limit.

Delete idle AS configurations or apply for a higher quota.

400

AS.1025

The user login mode in the AS configuration is not unique.

The user login mode in the AS configuration is not unique.

Use account-and-password or key-pair login mode only.

400

AS.1026

The user login mode in the AS configuration is empty.

The user login mode in the AS configuration is empty.

Use account-and-password or key-pair login mode only.

400

AS.1027

The scaling config personality is invalid.

The user AS configuration is invalid.

Enter a valid personality value.

400

AS.1028

The disk in the AS configuration is null.

The disk in the AS configuration is empty.

Enter a valid disk value.

400

AS.1029

The number of system disks in the AS configuration is invalid.

The number of system disks in the AS configuration is invalid.

Ensure that there is only one system disk.

400

AS.1030

The size of the system disk in the AS configuration is less than the specification required.

The size of the system disk in the AS configuration is smaller than the requirement.

Use a proper system disk size.

400

AS.1031

The size of the disk in the AS configuration is not correct.

The size of the disk in the AS configuration is invalid.

Use a proper disk size.

400

AS.1032

The ECS type [%s] in the AS configuration do not support 24 disks.

The number of disks in the AS configuration exceeds 24.

Ensure that the number of disks does not exceed the limit.

400

AS.1033

Parameter volumeType in the AS configuration is invalid.

The volumeType of the disk in the AS configuration is invalid.

Use a valid volume_type value.

400

AS.1034

Parameter diskType in the AS configuration is invalid.

The diskType in the AS configuration is invalid.

Use a valid disk_type value.

400

AS.1035

Parameter adminPass in the AS configuration is invalid.

The password in the AS configuration fails to meet the complexity requirements.

Use passwords that meet complexity requirements.

400

AS.1036

32-bit operating system (OS) does not support the specification [%s] with 4G memory.

The memory of 32-bit OS exceeds 4 GB.

Change the image or the policy.

400

AS.1038

Batch deleting the AS configuration failed.

Deleting AS configurations in batches fails.

If this error code is returned, use parameter Message to obtain the configuration ID and the failure cause.

400

AS.1039

The number of AS configurations is beyond the maximum limit.

The number of AS configurations to be deleted in batches exceeds the upper limit.

Delete a maximum of 50 AS configurations at a time.

400

AS.1040

The list of AS config to be deleted is null.

The AS configuration list is empty.

Add the IDs of the AS configurations to be deleted in batches.

400

AS.1041

The eip info of scaling config is null.

The eip field in the public_ip field is empty.

Ensure that the eip field is not empty when specifying the public_ip field.

400

AS.1042

The bandwidth size of eip is invalid.

The bandwidth size is invalid.

Enter a valid bandwidth.

400

AS.1043

The eip type of scaling config is invalid.

The EIP type is invalid.

Use a valid EIP type.

400

AS.1044

The bandwidth charging mode of eip is invalid.

The bandwidth billing model of the AS configuration is invalid.

Use a valid bandwidth billing model.

400

AS.1045

The bandwidth type of eip is invalid.

The bandwidth type is invalid.

Use a valid bandwidth.

400

AS.1046

The bandwidth size of eip is null.

The bandwidth size is not specified.

Add the bandwidth value of the AS configuration.

400

AS.1047

The bandwidth charging mode of eip is null.

The bandwidth billing model is not specified.

Specify a proper bandwidth billing model.

400

AS.1048

The bandwidth id of eip is null.

The shared bandwidth ID of the AS configuration is not specified.

Add the shared bandwidth ID.

400

AS.1049

Parameter userdata in the AS configuration is invalid.

Parameter userdata in the AS configuration is invalid.

Use a valid userdata.

400

AS.1050

The user login mode in the AS configuration is illegal.

The user login mode in the AS configuration is invalid.

Use a valid login mode.

400

AS.1052

Parameter metadata in the AS configuration is invalid.

The metadata in the AS configuration is invalid.

Use a valid metadata, whose maximum length is 512 bytes and the key value cannot contain spaces, $, or periods(.).

400

AS.1053

The data image is not available.

The data image in the AS configuration is unavailable.

Use a valid data image.

400

AS.1054

The size of the data disk in the AS configuration is less than the data image required.

The size of the data disk in the AS configuration is smaller than what the data image requires.

Use a proper data disk.

400

AS.1055

The system disk is not support to data image.

A data disk image cannot be used to create a system disk.

Refer to the error code description.

400

AS.1056

The data image in the AS configuration does not exist.

The data image in the AS configuration does not exist.

Use a valid data image ID.

400

AS.1057

The DSS of the disk in the AS configuration is not available.

The selected DSS device is unavailable.

Use a correct DSS device.

400

AS.1058

The type of dss in the AS configuration is incorrect.

The selected DSS device does not support the disk type.

Change the DSS device or disk type.

400

AS.1059

The capacity of dss in the AS configuration is not enough.

The storage space on the selected DSS device is insufficient.

Change the DSS device.

400

AS.1060

DSS and EVS are used together in the AS configuration.

You can use either DSS or EVS disks in an AS configuration.

Refer to the error code description.

400

AS.1061

The DSS does not belong to the same AZ in the AS configuration.

The selected DSS devices must be in the same AZ.

Change DSS devices so that they are in the same AZ.

400

AS.1062

The number of EVS disks with snapshot IDs in the AS configuration is different from that of EVS disks specified in the full-ECS image.

The number of disks with snapshot IDs in the AS configuration is different from that of EVS disks specified in the full-ECS image.

Refer to the error code description.

400

AS.1063

The disk data backup in a full-ECS image cannot be used to restore the disk in DSS.

The disk data backup in a full-ECS image is used to restore the disk in DSS.

Refer to the error code description.

400

AS.1064

The data disk you have selected will be restored using the disk data backup in the full-ECS image. Then, data mirroring will be unavailable.

Your selected data disk will recover from the disk backup in the full-ECS image, and data mirroring is unavailable now.

Refer to the error code description.

400

AS.1065

ECS resources specified in the AS configuration belong to different AZs.

The VMs in the AS configuration do not belong to the same AZ.

Use ECS resources (specifications, images, disk) in the same AZ.

400

AS.1066

The AS configuration contains EVS disks with invalid snapshot IDs.

The AS configuration contains EVS disks with invalid snapshot IDs.

Use a correct snapshot ID.

400

AS.1067

The value of parameter Offset number is invalid.

Parameter offset is invalid.

Use a valid offset value.

400

AS.1068

The server group in the AS configuration does not exist.

The ECS group in the AS configuration does not exist.

Use the ID of an existing ECS group.

400

AS.1069

The maximum number of ECSs has been reached for the ECS group.

The maximum number of ECSs has been reached for the ECS group.

Change to another ECS group ID.

400

AS.1070

The bandwidth id of eip does not exist.

The shared bandwidth of the AS configuration does not exist.

Use an existing shared bandwidth ID.

400

AS.1071

Parameter tenancy in the AS configuration is invalid.

Parameter tenancy in the AS configuration is invalid.

Use a valid tenancy value.

400

AS.1072

The server group ID is invalid.

The ECS group ID in the AS configuration is invalid.

Change to a correct ECS group ID.

400

AS.1073

The dedicated host id does not exist.

DeH ID in the AS configuration does not exist.

Use the ID of an existing DeH.

400

AS.1074

The value of parameter Marker is invalid.

Parameter marker is invalid.

Use a valid marker value.

400

AS.1075

The image ID is invalid.

Image ID in the AS configuration is invalid.

Use a correct image ID.

400

AS.1076

The bandwidth id of eip is invalid.

Shared bandwidth ID in the AS configuration is invalid.

Enter a correct shared bandwidth ID.

400

AS.1077

No available dedicated host resource.

No DeH available.

Create a DeH or restore an existing DeH.

400

AS.1078

The dedicated host has insufficient available capacity for [%s].

The selected DeH does not have sufficient capacity.

Allocate a DeH or use another DeH.

400

AS.1079

No dedicated host resources supporting this type [%s] of ECS.

No DeH that supports this type of ECSs is available.

Change the type of ECSs in the AS configuration.

400

AS.1080

No dedicated host resources supporting the AZ [%s] you selected.

No DeH is available in the AZ.

Change the AZ of the AS group or create a DeH in the AZ.

400

AS.1081

This specification [%s] does not support IPv6.

The AS configuration does not support IPv6 addresses.

Change the AS configuration.

400

AS.1082

Bandwidth type is not shared.

The bandwidth is not shared.

Use a shared bandwidth.

400

AS.1083

Instance marketing type is illegal.

The billing model in the AS configuration is invalid.

Use a valid market_type value.

400

AS.1084

Failed to query the price of specification [%s] from CBC.

Failed to query the spot pricing or pay-per-use flavor price.

Change the flavor in the AS configuration or contact technical support.

400

AS.1085

Invalid multi flavor priority policy.

The priority policy used in multi-flavor AS configuration is invalid.

Use a valid multi_flavor_priority_policy value.

400

AS.1086

AS configuration is not available for AS group

The AS configuration is unavailable.

Replace the AS configuration in the AS group.

400

AS.1087

The number of flavors in the AS config exceeds the upper limit.

The number of flavors in the AS configuration reaches the upper limit.

Ensure that the number of flavors in the AS configuration does not exceed the upper limit.

400

AS.1088

The image in the AS configuration you selected is unavailable for the AZ [%s] in AS group.

The image in the AS configuration is not available in the AZ of the AS group.

Change another AS configuration or AZ for the AS group.

400

AS.1090

Flavor {0} in the AS configuration is incompatible with the image architecture.

The selected flavor is incompatible with the image architecture.

Ensure that the selected flavor is compatible with the image architecture.

400

AS.2002

The name of the AS group is null.

The AS group name is empty.

Add an AS group name.

400

AS.2003

The AS group name is too long.

The AS group name is too long.

Use an AS group name of proper length.

400

AS.2004

Invalid min or max number of instances in the AS group.

The maximum or minimum number of instances is invalid.

Enter correct maximum/minimum number of instances for the AS group.

400

AS.2005

The expected number cannot be less than the minimum number of instances or greater than the maximum number of instances.

The expected number of instances in the AS group is invalid.

Enter a valid number of expected instances for the AS group.

400

AS.2006

Invalid cooldown period of the AS group.

The cooldown period in the AS group is invalid.

Enter a valid cooldown period for the AS group.

400

AS.2007

The AS group does not exist.

The AS group does not exist.

Use a correct AS group ID.

400

AS.2008

Invalid execution action of the AS group.

The scaling action of the AS group is invalid.

Use a correct scaling action for the AS group.

400

AS.2009

The AS group ID is null.

The AS group ID is not specified.

Add an AS group ID.

400

AS.2010

The expected number of instances in the AS group cannot be smaller than the number of instances for which instance protection has been configured.

The expected number of instances in the AS group cannot be smaller than the number of instances for which instance protection has been configured.

Ensure that the number of expected instances is no less than the protected instances, or change the expected number of instances after canceling instance protection.

400

AS.2011

Invalid AZ in AS group.

The AZ in the AS group is invalid.

Use a valid value.

400

AS.2012

The VPC of the AS group does not exist.

The VPC of the AS group does not exist.

Use a valid value.

400

AS.2013

Parameter networks in the AS group is invalid.

Parameter networks in the AS group is invalid.

Use a valid value.

400

AS.2014

The security group of the AS group does not exist.

The security group of the AS group does not exist.

Use a valid value.

400

AS.2015

Parameter listenerId in the AS group is invalid.

The load balancer listener of the AS group is invalid.

Use a valid value.

400

AS.2016

The listener of the AS group does not belong to the vpc.

The VPC to which the ELB listener in the AS group belongs is different from the VPC in the AS group.

Change the VPC ID or ELB listener ID.

400

AS.2017

The ID of the VPC in the AS group is null.

The VPC ID in the AS group is not specified.

Add a VPC ID.

400

AS.2018

No AS configuration is in the AS group.

No AS is configured in the AS group.

Enable the AS group after adding an AS configuration to the AS group.

400

AS.2019

The value of the parameter that specifies whether to forcibly delete an AS group is invalid.

The value of the parameter that specifies whether to forcibly delete an AS group is invalid.

Use a valid value.

400

AS.2020

The scaling group status is illegal.

The AS group status is invalid.

You are not allowed to perform the operation when the AS group is in the current status.

400

AS.2021

The current number of instances in the AS group is not 0.

Deleting the AS group fails because there are instances in it.

Before deleting the AS group, deleting its instances.

400

AS.2022

The AS group name contains invalid characters.

The AS group name contains invalid characters.

Use a correct AS group name.

400

AS.2023

The number of AS groups exceeds the upper limit.

The number of AS groups exceeds the upper limit.

Delete idle AS groups or apply for a higher quota.

400

AS.2024

The number of subnets in the AS group exceeds the upper limit.

The number of subnets in the AS group exceeds the upper limit.

Ensure that the number of subnets does not exceed the upper limit.

400

AS.2025

The number of security groups in the AS group exceeds the upper limit.

The number of security groups in the AS group exceeds the upper limit.

Ensure that the number of security groups does not exceed the upper limit.

400

AS.2026

The type of listeners in the AS group is not unique.

There are ELB listeners of different types in the AS group.

lb_listener_id is alternative to lbaas_listeners.

400

AS.2027

The subnet of the AS group does not belong to the vpc.

The VPC to which some subnets in the AS group belong is different with the VPC in the AS group.

Change the VPC ID or subnet.

400

AS.2028

The modified expected number of instances is the same as the original number.

The new expected number of instances is the same as the original number.

Refer to the error code description.

400

AS.2029

Invalid health check method of the AS group.

The health check method for instances in the AS group is incorrect.

Use a valid health_periodic_audit_method value.

400

AS.2030

You are not allowed to modify the AZ, subnet, and security information when the number of instances in the AS group is not 0, the AS group is scaling, or the AS group is in Inservice status.

You are not allowed to modify the AZ, subnet, or security group information when there are instances in the AS group, the AS group is scaling, or the AS group is in Inservice state.

Check the number of instances in the AS group and the status of the AS group, or try again later.

400

AS.2031

Invalid health check period of the AS group.

The health check period of the AS group is invalid.

Use a valid health_periodic_audit_time value.

400

AS.2032

Invalid instance removal policy.

The instance removal policy for the AS group is invalid.

Use a valid instance_terminate_policy value.

400

AS.2033

You are not allowed to perform the operation when the AS group is in current [%s] status.

You are not allowed to perform the operation when the AS group is in the current status.

Refer to the error code description.

400

AS.2034

Invalid notification method of the AS group.

The notification method for the AS group is invalid.

Use a valid notification method.

400

AS.2035

The number of instances manually added to the AS group exceeds the maximum number of the instances required in the AS group.

The number of ECSs in the AS group is greater than the upper limit because some ECSs are manually added.

Add a proper number of ECSs or increase the maximum number of instances in the AS group.

400

AS.2036

The number of instances manually deleted is less than the minimum number of the instances required in the AS group.

The number of ECSs in the AS group is smaller than the lower limit because some ECSs are manually deleted.

Delete a proper number of ECSs or decrease the minimum number of instances in the AS group.

400

AS.2037

The number of listeners in the AS group exceeds the upper limit.

The number of ELB listeners in the AS group reaches the upper limit.

Select a proper number of load balancer listeners.

400

AS.2038

The type [%s] of ECS in the AZ you selected has been sold out.

The ECSs of this type have been sold out in the AZ specified for this AS group.

Refer to the error code description. Change the AZ of the AS group or change the AS configuration for the AS group.

400

AS.2039

Parameter protocolPort of the AS group is invalid.

Parameter protocolPort of the AS group is invalid.

Use a valid protocolPort.

400

AS.2040

Parameter weight of the AS group is invalid.

Parameter weight of the AS group is invalid.

Use a valid weight.

400

AS.2042

Parameter pool of lbaas in the AS group is invalid.

The load balancer pool in the AS group is invalid.

Use a valid pool.

400

AS.2043

There is not avalid volume in the AZ [%s] you selected.

Storage resources of this type are sold out or do not exist in the AZ specified for this AS group.

Refer to the error code description. Change the AZ of the AS group or change the AS configuration for the AS group.

400

AS.2044

The AZ in the AS group is not available.

The AZ in the AS group is invalid.

Refer to the error code description. Change the AZ of the AS group.

400

AS.2045

The min or max number of instances in the AS group exceeds the upper limit.

The minimum or maximum number of instances in the AS group exceeds the limit.

Enter proper maximum and minimum numbers of instances for the AS group.

400

AS.2046

Invalid health check grace period of the AS group.

The grace period for the instance health check is invalid.

Use a valid health_periodic_audit_grace_period value.

400

AS.2047

The AS group is in active status.

Failed to modify load balancer parameters because a scaling action is ongoing.

Wait until the scaling action is complete and modify the load balancer parameters again.

400

AS.2051

The expected number cannot be less than the number of instances moved into the standby state.

The number of expected instances cannot be less than that of standby instances.

Ensure that the number of expected instances is not less than that of standby instances (including instances that are entering the standby mode and those that are already in standby mode).

400

AS.2052

The expected number cannot be less than the sum of the number of standby instances and protected instances.

The number of expected instances cannot be less than the total of standby and protected instances.

Ensure that the number of expected instances is not less than the total of standby (including instances that are entering the standby mode and those that are already in standby mode) and protected instances.

400

AS.2053

Invalid multi az priority policy.

The priority policy used for multiple AZs in the AS group is invalid.

Change the priority policy used for multiple AZs in the AS group.

400

AS.2054

The AS group is in active status.

Failed to change the AZ because a scaling action is ongoing.

Wait until the scaling action is complete and change the AZ again.

400

AS.3002

Invalid AS policy type.

The AS policy type is invalid.

Use a valid scaling_policy_type value.

400

AS.3003

The information about the AS policy is null.

When the AS policy is scheduled or periodic, parameter scheduled_policy is empty.

Use a valid scheduled_policy value.

400

AS.3004

Invalid recurrence type in the AS policy.

The period type is incorrect.

Use a valid recurrence_type value.

400

AS.3005

The end time of the scaling action triggered periodically is empty.

The end time is not specified for a periodic AS policy.

Enter a valid end_time value.

400

AS.3006

The format of the end time for the scaling action triggered periodically is incorrect.

The format of the end time for the periodically triggered scaling action is incorrect.

Use a correct format for the end time.

400

AS.3007

The end time of the scaling action triggered periodically must be later than the current time.

The end time of the scaling action triggered periodically must be later than the current time.

Ensure that the end time is later than the current time.

400

AS.3008

Parameter lanchTime in the AS policy is null.

The triggering time is not specified.

Enter a valid launch_time value.

400

AS.3009

The format of parameter lanchTime is incorrect.

The triggering time format is incorrect.

Use a correct triggering time format.

400

AS.3010

The triggering time of the scheduled policy must be later than the current time.

The triggering time of the scaling action triggered at a scheduled time must be later than the current time.

Ensure that the triggering time of the scheduled policy is later than the current time.

400

AS.3011

The AS policy type is null.

The AS policy type is not specified.

Enter a valid scaling_policy_type value.

400

AS.3012

Invalid cooldown period in the AS policy.

The cooldown period in the AS policy is invalid.

Enter a valid cool_down_time value.

400

AS.3013

The AS policy name is null.

The AS policy name is not specified.

Enter a valid scaling_policy_name value.

400

AS.3014

The length of the AS policy name is invalid.

The length of the AS policy name is invalid.

Enter a valid scaling_policy_name value.

400

AS.3015

The action in the AS policy is null.

The execution action in the AS policy is not specified.

Enter a valid scaling_policy_action value.

400

AS.3016

The operation to perform the action in the AS policy is null.

The operation to perform the execution action in the AS policy is not specified.

Enter a valid operation value.

400

AS.3017

The operation to perform the action in the AS policy action is invalid.

The operation to perform the action in the AS policy is invalid.

Enter a valid operation value.

400

AS.3018

The number of instances which action in the AS policy operates on is invalid.

The number of instances to which the AS policy applies is invalid.

Enter a valid instance_number value.

400

AS.3019

The AS group ID in the AS policy cannot be null.

The AS group ID in the AS policy is not specified.

Add an AS group ID.

400

AS.3020

The AS policy does not exist.

The AS policy does not exist.

Use a correct AS policy ID.

400

AS.3021

The AS policy ID cannot be null.

The AS policy ID is not specified.

Add an AS policy ID.

400

AS.3022

The action of the AS policy request body is invalid.

The action of the AS policy request body is invalid.

Use a valid action value.

400

AS.3023

The period type of the AS policy is null.

The period type of the AS policy is empty.

Use a valid recurrence_type value.

400

AS.3024

The value of the period type of the AS policy is null.

The value of the periodically triggered tasks of the AS policy is empty.

Add a valid recurrence_value value.

400

AS.3025

The value of period type of the AS policy is invalid.

The period type of the AS policy is invalid.

Use a valid recurrence_type value.

400

AS.3026

The alarm ID in the AS policy is null.

The alarm ID in the AS policy is empty.

Add an alarm ID.

400

AS.3027

The AS policy must be in the inservice status when the AS policy is performed.

The AS group must be in service when the AS policy is performed.

Enable the AS group and try again.

400

AS.3028

The format of the start time for the scaling action triggered periodically is incorrect.

The format of the start time for the periodically triggered scaling action is incorrect.

Use a correct format for the start time.

400

AS.3029

The start time of the scaling action triggered periodically must be earlier than the end time.

The start time of the periodically triggered scaling action must be earlier than the end time.

Ensure that the start time of the periodic policy is earlier than the end time.

400

AS.3030

The alarm in the AS policy does not exist.

The alarm rule in the AS policy does not exist.

Modify the alarm rule used by the AS policy.

400

AS.3031

Invalid AS policy name.

The AS policy name is invalid.

Enter a valid scaling_policy_name value.

400

AS.3032

The number of AS policies exceeds the upper limit.

The number of AS policies exceeds the upper limit.

Delete idle AS policies or apply for a higher quota.

400

AS.3033

The triggering time of the periodic policy is not included in the effective time of the policy.

The triggering time of the periodic policy falls outside the effective time range of the policy.

Ensure that the triggering time of the periodic policy is within the range from the start time to the end time.

400

AS.3034

The alarm ID in the AS policy is being used by another AS group.

The alarm ID in the AS policy is being used by another AS group.

Refer to the error code description. An alarm ID can be used only by the AS policy in one AS group at a time.

400

AS.3035

The percentage of instances which action in the AS policy operates on is invalid.

The percentage of instances to which the AS policy applies is invalid.

Use a valid instance_percentage value.

400

AS.3036

The action in the AS policy operates is not unique.

The action in the AS policy operates is not unique.

Select one from instance_percentage or instance_number.

400

AS.3037

The scaling resource type in the AS policy is invalid.

The resource type in the AS policy is invalid.

Use a valid scaling_resource_type value.

400

AS.3038

The AS policy is in executing status.

The AS policy is being executed and cannot be executed again.

Try again later.

400

AS.3040

The adjustment by policy reached the limit

The number of modifications to scaling resources in the AS policy has reached the upper limit.

Refer to the error code description.

400

AS.3041

The scaling resource ID in the AS policy is null.

The scaling resource ID in the AS policy is not specified.

Enter a valid AS resource ID in the AS policy.

400

AS.3042

The scaling resource in the AS policy does not exist.

The scaling resource in the AS policy does not exist.

Enter a valid AS resource ID in the AS policy.

400

AS.3043

The limit which action in the AS policy operates on is invalid.

The value of parameter limits in the AS policy is invalid.

Use a valid limits value in the AS policy.

400

AS.3044

Parameter limits in the AS policy is invalid.

Bandwidth billed in yearly/monthly mode cannot be dynamically changed.

Select a valid bandwidth.

400

AS.3045

Failed to delete policies in a batch.

Failed to delete policies in batches.

If this error code is returned, use parameter Message to obtain the policy ID and the failure cause.

400

AS.3046

Failed to resume policies in a batch.

Failed to enable policies in batches.

If this error code is returned, use parameter Message to obtain the policy ID and the failure cause.

400

AS.3047

Failed to pause policies in a batch.

Failed to disable policies in batches.

If this error code is returned, use parameter Message to obtain the policy ID and the failure cause.

400

AS.3048

The value of the parameter that specifies whether to forcibly delete the policy is invalid.

The value of the parameter that specifies whether to forcibly delete the policy is invalid.

Use a valid force_delete value.

400

AS.3049

The list of AS policies to be batched is empty.

The list of AS policies on which a batch operation is to be performed is empty.

Add the IDs of the AS policies to be operated in batches.

400

AS.3050

The alarm ID in the AS policy is illegal.

The format of the alarm ID in the AS policy is incorrect.

Use an alarm ID in correct format.

400

AS.3054

The scaling resource type in the AS policy is null.

The scaling resource type in the AS policy cannot be left blank.

Use a valid scaling_resource_type value.

400

AS.3055

The scaling resource ID in the AS policy is format wrong.

The scaling resource ID in the scaling policy is invalid.

Enter a valid AS resource ID in the AS policy.

400

AS.3056

The value of the parameter that specifies whether to delete the alarm in the AS policy is invalid.

The value of the alarm rule used for deleting the scaling policy is invalid.

Use a valid delete_alarm value.

400

AS.3057

The value of parameter sort_by in the request is invalid.

The sort_by value in the request is invalid.

Use a valid sort_by value.

400

AS.3058

The value of parameter order in the request is invalid.

The order value in the request is invalid.

Use a valid order value.

400

AS.4000

The value of parameter start_number in the request for the instance is invalid.

The start_number value in the instance request is invalid.

Use a valid start_number value.

400

AS.4001

The value of parameter limit in the request for the instance is invalid.

The limit value in the instance request is invalid.

Use a valid limit value.

400

AS.4003

The value of parameter life_cycle_state in the instance request is invalid.

The life_cycle_state value in the instance request is invalid.

Use a valid life_cycle_state value.

400

AS.4004

The value of parameter health_status in the request for the instance is invalid.

The health_status value in the instance request is invalid.

Use a valid health_status value.

400

AS.4005

Parameter scaling_group_id in the request for the instance does not exist.

The scaling_group_id in the instance request does not exist.

Use a correct scaling_group_id.

400

AS.4006

The instance does not exist.

The instance does not exist.

Use a correct instance ID.

400

AS.4007

The value of the parameter that specifies whether to delete the instance is invalid.

The value of the parameter that specifies whether to delete the instance is invalid.

Use a valid value.

400

AS.4008

The start time format of the log about the expected number of the instances is incorrect.

The start time format of the log about the expected number of the instances is incorrect.

Use a correct format.

400

AS.4009

The end time format of the log about expected number of the instances is incorrect.

The end time format of the log about expected number of the instances is incorrect.

Use a correct format.

400

AS.4010

Parameter start_number in the request for the log about the expected number of instances is invalid.

The start_number in the request for the log about the expected number of instances is invalid.

Use a valid start_number value.

400

AS.4011

The value of parameter limit in the request for the log about the expected number of instances is invalid.

The value of limit in the request for the log about the expected number of instances is invalid.

Use a valid limit value.

400

AS.4012

The value of parameter logId in the request for the log about the expected number of instances is invalid.

The logId in the request for the log about the expected number of instances is invalid.

Use a valid logId value.

400

AS.4013

The list of instances to be deleted is null.

The list of instances to be deleted is empty.

Add instances to be deleted.

400

AS.4014

The instances do not belong to the same AS group.

The instances do not belong to the same AS group.

Select instances in the same AS group.

400

AS.4015

The instance is not in the inservice status.

The instance is not in inservice state.

Select an inservice instance.

400

AS.4016

Failed to delete the instance because the instance is charged by month or year.

The instance cannot be deleted because it is charged by month or year.

Refer to the error code description.

400

AS.4017

The requested instance is null.

The requested instance is empty.

Enter a valid instance.

400

AS.4018

The action of the body in the request to operate the instance is invalid.

The value of the request body action of the batch instance operation is invalid.

Use a valid value.

400

AS.4019

The list of instances to be added to the AS group is empty.

The list of instances to be added to the AS group is empty.

Enter a valid instance.

400

AS.4020

The AZ to which the instance belongs is not within the AZ in the AS group.

The AZ to which the instance belongs is different from the AZ to which the AS group belongs.

Select a proper instance for the AZ.

400

AS.4021

The VPC to which the instance belongs is different from the VPC in the AS group.

The VPC to which the instance belongs is different from the VPC in the AS group.

Select a proper instance for the VPC.

400

AS.4022

The number of instances added to the AS group exceeds the upper limit.

The number of instances added to the AS group exceeds the upper limit.

Add a proper number of instances.

400

AS.4023

The added instance has already existed.

The added instance already exists.

Select another valid instance.

400

AS.4024

The instance is not in the active status.

The added instance is not in the active state.

Select an active instance.

400

AS.4025

The value of the parameter that specifies whether to append new instance(s) is invalid.

Invalid value for determining whether to add new ECSs when ECSs enter the standby mode.

Use a valid value.

400

AS.4026

The number of instances deleted exceeds the upper limit.

The number of instances deleted exceeds the upper limit.

Delete a proper number of instances.

400

AS.4027

The added instance has already existed in other AS group.

The instance has already been added to another AS group.

Select another valid instance.

400

AS.4028

The AS instance ID cannot be null.

The instance ID cannot be left blank.

Use a correct instance ID.

400

AS.4029

Failed to add instances in a batch.

Failed to batch add instances.

If this error code is returned, use parameter Message to obtain the instance ID and the failure cause.

400

AS.4030

Failed to delete instances in a batch.

Failed to delete instances in batches.

If this error code is returned, use parameter Message to obtain the instance ID and the failure cause.

400

AS.4032

The list of instances is null.

The list of instances is empty.

Refer to the error code description.

400

AS.4033

Failed to set instance protection in a batch.

Failed to set instance protection in a batch.

If this error code is returned, use parameter Message to obtain the instance ID and the failure cause.

400

AS.4036

Failed to set instance enter standby in a batch.

Failed to set instances to standby mode.

If this error code is returned, use parameter Message to obtain the instance ID and the failure cause.

400

AS.4037

Failed to set instance exit standby in a batch.

Failed to cancel standby mode for instances.

If this error code is returned, use parameter Message to obtain the IDs of the instances and the failure cause.

400

AS.4038

The instance is not in the standby status.

The instance is not in standby mode.

Select a standby instance.

400

AS.4039

After adding new instances equal to the number of standby instances, the expected number cannot be larger than the max instance number of group.

The number of expected instances cannot be greater than the maximum number of instances after the instances with the same number of standby instances are added to the AS group.

Change the maximum number of instances.

400

AS.4043

The number of instances exceeds the upper limit.

The number of instances for batch operations exceeds the upper limit.

Ensure that the number of instances for batch operations is no more than 10 at a time.

400

AS.7003

called interface of VPC service failed

Failed to call APIs of the VPC service.

Try again later or contact technical support.

400

AS.7011

This DeC does not support ECSs of this type [%s].

This DeC does not support ECSs of this type.

Use other types of ECS specifications.

400

AS.7012

The ELB listener is unavailable.

The ELB listener does not exist.

Modify the ELB listener information.

400

AS.7016

This DeC does not support the AZ [%s] you selected.

This DeC does not support this AZ.

Modify the AZ information.

400

AS.7019

The number of private IP addresses in the subnet is insufficient.

Private IP addresses in the subnet are insufficient.

Modify the subnet information and enable the AS group.

400

AS.7022

The key pair does not exist.

The SSH key of the AS configuration does not exist.

Replace the AS configuration in the AS group.

400

AS.7025

The topic urn is not valid.

The notification subject is invalid.

Use a valid notification subject.

400

AS.7026

The topic scene is not valid.

The notification scene is invalid.

Use a valid notification scene.

400

AS.7027

The topic of notification is null.

The notification subject is empty.

Add a notification subject.

400

AS.7028

The number of topics in the AS group exceeds the upper limit.

The number of notifications in the AS group exceeds the upper limit.

Add a maximum of five notifications.

400

AS.7029

The topic of notification is duplicate.

The notification subject is duplicate.

Use a correct notification subject.

400

AS.7030

Invalid lifecycle hook default timeout.

The lifecycle hook timeout duration is invalid.

Use a valid value.

400

AS.7031

Invalid lifecycle hook name.

The lifecycle hook name is invalid.

Use a valid value.

400

AS.7032

The name of the lifecycle hook is empty.

The lifecycle hook name is empty.

Add a lifecycle hook name.

400

AS.7033

Invalid lifecycle hook type.

The lifecycle hook type is invalid.

Use a valid value.

400

AS.7034

Invalid lifecycle hook callback action result.

The default callback action of the lifecycle hook is invalid.

Use a valid value.

400

AS.7035

The metadata of the lifecycle hook is too long.

The length of lifecycle hook metadata exceeds the maximum allowed.

Use a valid value.

400

AS.7036

The lifecycle hook is null.

The lifecycle hook is empty.

Use a valid value.

400

AS.7037

The type of the lifecycle hook is empty.

The lifecycle hook type is empty.

Use a valid value.

400

AS.7038

The number of hooks in the AS group exceeds the upper limit.

The number of lifecycle hooks exceeds the upper limit.

Add a maximum of five lifecycle hooks.

400

AS.7039

The lifecycle hook callback action result is empty.

The lifecycle hook callback action is empty.

Use a valid value.

400

AS.7040

The lifecycle hook callback object is empty.

The lifecycle hook callback object is empty.

Use a valid value.

400

AS.7041

The lifecycle hook callback object is empty.

The lifecycle hook name already exists.

Use a valid value.

400

AS.7042

The lifecycle hook callback object does not exist.

The lifecycle hook callback object does not exist.

Use a valid value.

400

AS.7043

The lifecycle hook topic urn does not exist.

The notification subject configured for your lifecycle hook does not exist.

Use a valid value. Check the notification subject configured for your lifecycle hook.

400

AS.7044

The tag of this resource is null

The tag of this resource is empty.

Use a valid value.

400

AS.7045

The number of tags exceeded.

The maximum number of tags has been reached.

Add a maximum of 10 tags.

400

AS.7047

The value of tag in the resource is too long.

The tag value is too long.

Use a valid value.

400

AS.7048

The resource type in this operation with tag is invalid.

The resource type in this operation with tag is invalid.

Use a valid value.

400

AS.7049

The action in this operation with tag is invalid.

The action in this operation with tag is invalid.

Use a valid value.

400

AS.7050

The key of tag cannot be duplicate.

The key of tag is duplicate.

Use a valid value.

400

AS.7051

The backend ECS group in the AS group does not exist.

The backend ECS group in the AS group does not exist.

Use a valid value. Change the pool of ELB.

400

AS.7052

The matches in the resource is invalid.

The matches value is invalid.

Use a valid matches value.

400

AS.7055

The metadata of the lifecycle hook has special character.

The lifecycle hook metadata contains invalid characters.

Use a valid value.

400

AS.7061

The value of scaling tag is null.

The value of the tag is empty.

Use a valid value.

400

AS.7062

The key of scaling tag is null.

The key of the tag is empty.

Use a valid value.

400

AS.7063

The key of scaling tag is too long.

The tag key is too long.

Use a valid value.

400

AS.7111

Insufficient instance quota.

Insufficient ECS quota.

Release idle ECSs or increase the ECS quota.

400

AS.7112

Insufficient volume quota.

Insufficient EVS disk quota.

Release idle ECSs or increase the EVS disk quota.

400

AS.7113

Insufficient elastic ip quota.

Insufficient EIP quota.

Release idle EIPs or increase the EIP quota.

400

AS.7114

Insufficient ram quota.

Insufficient ECS memory quota.

Release idle ECSs or increase the ECS memory quota.

400

AS.7115

Insufficient cpu quota.

Insufficient ECS vCPU quota.

Release idle ECSs or increase the ECS vCPU quota.

400

AS.7118

The maximum number of EIPs bounded to this shared bandwidth has been reached.

The maximum number of EIPs that can be bound to the shared bandwidth has been reached.

Change the shared bandwidth.

400

AS.8004

User resources are frozen.

User resources are frozen and cannot be operated.

Recharge your account, after which the system will automatically unfreeze your resources.

400

AS.9001

The format of the start time of the scaling activity log is incorrect.

The format of the start time of the scaling log is incorrect.

Use a valid value.

400

AS.9002

The format of the end time for the scaling action log is incorrect.

The format of the end time for the scaling log is incorrect.

Use a valid value.

400

AS.9003

The value of parameter start_number in the request for the scaling activity log is invalid.

The start_number in the request for the scaling log is invalid.

Use a valid value.

400

AS.9004

The value of parameter limit in the request for the scaling activity log is invalid.

The limit in the request for the scaling log is invalid.

Use a valid value.

400

AS.9005

The value of parameter log_id in the request for the scaling log is invalid.

The logId in the request for the scaling log is invalid.

Use a valid value.

400

AS.9007

The format of the execute time in the request is incorrect.

The time format of the AS policy execution log is incorrect.

Use a valid value.

400

AS.9008

The value of parameter start_number in the request is invalid.

Parameter start_number in the AS policy execution log is invalid.

Use a valid value.

400

AS.9009

The value of parameter limit in the request is invalid.

Parameter limit in the AS policy execution log is invalid.

Use a valid value.

400

AS.9010

The value of parameter log_id in the request is invalid.

Parameter logId in the AS policy execution log is invalid.

Use a valid value.

400

AS.9011

The value of parameter scaling_resource_id in the request is invalid.

The resource ID in the AS policy execution log is invalid.

Use a valid value.

400

AS.9012

The value of parameter type in the request for the scaling activity log is invalid.

The type in the request for the scaling action log is invalid.

Use a valid type value.

400

AS.9013

The value of parameter status in the request for the scaling activity log is invalid.

The status in the request for the scaling action log is invalid.

Use a valid value.