Help Center> Virtual Private Cloud> User Guide> Security> Network ACL> Creating a Network ACL
View PDF

Creating a Network ACL

Scenarios

You can create a custom network ACL, but any newly created network ACL will be disabled by default. It will not have any inbound or outbound rules, or have any subnets associated. Each user can create up to 200 network ACLs by default.

Procedure

  1. Log in to the management console.
  1. Click in the upper left corner and select the desired region and project.
  2. On the console homepage, under Network, click Virtual Private Cloud.
  3. In the navigation pane on the left, choose Access Control > Network ACLs.
  4. In the right pane displayed, click Create Network ACL.
  5. In the displayed dialog box, enter network ACL information as prompted. Table 1 lists the parameters to be configured.
    Figure 1 Create Network ACL
    Table 1 Parameter descriptions

    Parameter

    Description

    Example Value

    Name

    The network ACL name. This parameter is mandatory.

    The name contains a maximum of 64 characters, which may consist of letters, digits, underscores (_), and hyphens (-). The name cannot contain spaces.

    fw-92d3

    Description

    Supplementary information about the network ACL. This parameter is optional.

    The description can contain a maximum of 255 characters and cannot contain angle brackets (< or >).

    N/A
  6. Click OK.
Parent topic: Network ACL